TP-Link TL-MR3220 User Guide

TP-Link TL-MR3220 Manual

Get TP-Link TL-MR3220 PDF manuals and user guides
UPC - 845973051501
View all TP-Link TL-MR3220 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link TL-MR3220 manual content summary:

  • TP-Link TL-MR3220 | User Guide - Page 1
    TL-MR3220 3G/3.75G Wireless Lite N Router Rev: 1.0.0 1910010350
  • TP-Link TL-MR3220 | User Guide - Page 2
    without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2010 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www.tp-link.com FCC and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
  • TP-Link TL-MR3220 | User Guide - Page 3
    set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. "To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations network and service supply(
  • TP-Link TL-MR3220 | User Guide - Page 4
    following equipment: Product Description: 3G/3.75G Wireless Lite N Router Model No.: TL-MR3220 Trademark: TP-LINK We declare under our own V1.7.1: 2006 ETSI EN 301 489-1 V1.8.1:2008& ETSI EN 301 489-17 V2.1.1:2009 EN60950-1:2006 Recommendation 1999/519/EC EN62311:2008 Directives 2004/108/EC The
  • TP-Link TL-MR3220 | User Guide - Page 5
    Installation Guide 10 Chapter 4. Configuring the Router 17 4.1 Login ...17 4.2 Status ...17 4.3 Quick Setup...19 4.4 QSS...19 4.5 Network ...25 4.5.1 Internet Access 25 4.5.2 3G...27 4.5.3 WAN ...33 4.5.4 MAC Clone ...43 4.5.5 LAN...44 4.6 Wireless ...45 4.6.1 Wireless Settings 45 4.6.2 Wireless
  • TP-Link TL-MR3220 | User Guide - Page 6
    Rules List...84 4.14 IP & MAC Binding Setting 85 4.14.1 Binding Setting 85 4.14.2 ARP List...87 4.15 Dynamic DNS...88 4.15.1 Comexe.cn DDNS 88 4.15.2 Dyndns.org DDNS 89 4.15.3 No-ip.com DDNS 90 4.16 System Tools ...91 4.16.1 Time Setting...92 4.16.2 Diagnostic...93 4.16.3 Firmware Upgrade 94
  • TP-Link TL-MR3220 | User Guide - Page 7
    4.16.8 System Log...98 4.16.9 Statistics ...100 Appendix A: FAQ ...102 Appendix B: Configuring the PCs 107 Appendix C: Specifications ...111 Appendix D: Glossary...112 Appendix E: Compatible 3G/3.75G USB Modem 114 III
  • TP-Link TL-MR3220 | User Guide - Page 8
    Power Adapter for TL-MR3220 3G/3.75G Wireless Lite N Router ¾ Quick Installation Guide ¾ Resource CD for TL-MR3220 3G/3.75G Wireless Lite N Router, including: • This Guide • Other Helpful Information ) Note: Make sure that the package contains the above items. If any of the listed items are damaged
  • TP-Link TL-MR3220 | User Guide - Page 9
    feature makes an impression immensely when users are streaming video or music and especially when playing online games where lag often means "Game Over". 1.2 Conventions The Router or TL-MR3220 mentioned in this guide stands for TL-MR3220 3G/3.75G Wireless Lite N Router without any explanation. -2-
  • TP-Link TL-MR3220 | User Guide - Page 10
    TL-MR3220 3G/3.75G Wireless Lite N Router 1.3 Main Features ¾ One 10/100M Auto-Negotiation RJ45 WAN port, four 10/100M Auto-Negotiation RJ45 LAN ports, supporting Auto MDI/MDIX ¾ Compatible with UMTS/HSPA/EVDO USB dongle ¾ Automatic 3G / WAN failover ¾ Wireless Lite N speed up to 150Mbps ¾ 1T2R MIMO
  • TP-Link TL-MR3220 | User Guide - Page 11
    . Please use the power adapter provided with this TL-MR3220 3G/3.75G Wireless Lite N Router. ¾ WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet ¾ 1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s) ¾ USB: Connect to the USB Modem. ¾ RESET: -4-
  • TP-Link TL-MR3220 | User Guide - Page 12
    TL-MR3220 3G/3.75G Wireless Lite N Router There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on "System Tools -> Factory Defaults" page in the Router's Web-based Utility. 2) Use the Factory Default Reset button: With the Router powered on, use a pin to
  • TP-Link TL-MR3220 | User Guide - Page 13
    TL-MR3220 3G/3.75G Wireless Lite N Router Chapter 2. Connecting the Router 2.1 System Requirements ¾ Broadband Internet Access Service (DSL/Cable/Ethernet) ¾ One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is connected directly to the Ethernet.) ¾ PCs with a
  • TP-Link TL-MR3220 | User Guide - Page 14
    TL-MR3220 3G/3.75G Wireless Lite N Router tested by us. 6. Connect the power adapter to the power socket on the Router, and the other end into an electrical outlet. The Router will start to work automatically. 7. Power on your PC and Cable/DSL Modem. Figure 2-1 Hardware Installation of the 3G/3.75G
  • TP-Link TL-MR3220 | User Guide - Page 15
    TL-MR3220 3G/3.75G Wireless Lite N Router Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your 3G/3.75G Wireless Lite N Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default IP address of the 3G/3.75G Wireless Lite
  • TP-Link TL-MR3220 | User Guide - Page 16
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 3-1 Success result of Ping command ¾ If the result displayed is similar to the Figure 3-2, it means the connection between your PC and the Router is failed. Figure 3-2 Failure result of Ping command Please check the connection following these steps:
  • TP-Link TL-MR3220 | User Guide - Page 17
    TL-MR3220 3G/3.75G Wireless Lite N Router 2. Is the TCP/IP configuration for your PC correct? ) Note: If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of 192.168.1.2 ~ 192.168.1.254. 3.2 Quick Installation Guide With a Web-based (Internet Explorer or Netscape®
  • TP-Link TL-MR3220 | User Guide - Page 18
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 3-5 Quick Setup 3. Click Next, and then Internet Access page will appear, shown in Figure 3-6. Select a desired Internet access mode and then click Next. The configuration for each mode is similar. Here we take 3G Preferred mode for example. Figure
  • TP-Link TL-MR3220 | User Guide - Page 19
    TL-MR3220 3G/3.75G Wireless Lite N Router WAN network, the router would stop the 3G connection and switch back to WAN access immediately. ¾ WAN Only In this mode, the router will try WAN access only. 3G access is disabled. 4. The next screen will appear as shown in Figure 3-7. After finishing the
  • TP-Link TL-MR3220 | User Guide - Page 20
    TL-MR3220 3G/3.75G Wireless Lite N Router Internet service is successfully detected by the Router. Figure 3-8 ¾ If the connection type detected is PPPoE, the next screen will appear as shown in Figure 3-9. Enter the User Name and Password provided by your ISP. These fields are case
  • TP-Link TL-MR3220 | User Guide - Page 21
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 3-10 Quick Setup - Static IP 6. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-11. Figure 3-11 Quick Setup - Wireless ¾ Wireless Radio - Enable or disable the wireless radio choosing from the pull-down list. ¾ SSID
  • TP-Link TL-MR3220 | User Guide - Page 22
    necessary to change the wireless channel unless you notice interference problems with another nearby access point. ¾ Mode - This field determines the wireless mode which the Router works on. ¾ Channel Width - Select any channel width from the pull-down list. The default setting is automatic, which
  • TP-Link TL-MR3220 | User Guide - Page 23
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 3-12 Quick Setup - Finish If there are something changed on the Wireless page, you will see the Finish page as shown in Figure 3-13. Click the Reboot button to make your wireless configuration to take effect and finish the Quick Setup. Figure 3-13
  • TP-Link TL-MR3220 | User Guide - Page 24
    TL-MR3220 3G/3.75G Wireless Lite N Router Chapter 4. Configuring the Router This chapter will show each Web page's key functions and the configuration way. 4.1 Login After your successful login, you will see the fifteen main menus on the left of the Web-based utility. On the right, there
  • TP-Link TL-MR3220 | User Guide - Page 25
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-1 Router Status -18-
  • TP-Link TL-MR3220 | User Guide - Page 26
    TL-MR3220 3G/3.75G Wireless Lite N Router 4.3 Quick Setup Please refer to Section 3.2: "Quick Installation Guide." 4.4 QSS This section will guide you add a new wireless device to an existing network quickly by QSS (Quick Secure Setup) function. a). Choose menu "QSS", you will see the next screen (
  • TP-Link TL-MR3220 | User Guide - Page 27
    TL-MR3220 3G/3.75G Wireless Lite N Router method, you can add it to the network by PBC with the following two methods. Method One: Step 1: Press the QSS button on the front panel of the Router. Step 2: Press and hold the QSS button of the adapter directly for 2 or 3 seconds. Step 3: Wait for a while
  • TP-Link TL-MR3220 | User Guide - Page 28
    TL-MR3220 3G/3.75G Wireless Lite N Router The QSS Configuration Screen of Wireless Adapter Step 3: Wait for a while until the next screen appears. Click Finish to complete the QSS configuration. The QSS Configuration Screen of Wireless Adapter Method Three: Step 1: Keep the default QSS Status as
  • TP-Link TL-MR3220 | User Guide - Page 29
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-3 Add A New Device Step 2: Choose Press the button of the new device in two minutes and click Connect. Step 3: For the configuration of the wireless adapter, please choose Push the button on my access point in the configuration utility of the QSS as
  • TP-Link TL-MR3220 | User Guide - Page 30
    TL-MR3220 3G/3.75G Wireless Lite N Router The QSS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods. Method One: Enter the PIN into my Router Step 1: Keep the
  • TP-Link TL-MR3220 | User Guide - Page 31
    TL-MR3220 3G/3.75G Wireless Lite N Router The QSS Configuration Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method Two: Enter the PIN from my Router Step 1: Get the Current PIN code of the Router in Figure 4-2 (each
  • TP-Link TL-MR3220 | User Guide - Page 32
    , MAC Clone and LAN. Click any of them, and you will be able to configure the corresponding function. 4.5.1 Internet Access Choose menu "Network→Internet Access", you can configure the access mode on the screen below. The router is designed to work with either WAN port or 3G USB modem, and supports
  • TP-Link TL-MR3220 | User Guide - Page 33
    firmware: http://www.tp-link.com/support/download.asp 3) If you are using the 3G Preferred or WAN Preferred, the router would connect, disconnect or switch the current access automatically. The Connect/Disconnect button (on 3G, PPPoE, PPTP, L2TP) and some related parameters could not be set manually
  • TP-Link TL-MR3220 | User Guide - Page 34
    TL-MR3220 3G/3.75G Wireless Lite N Router 4.5.2 3G Choose menu "Network→3G", you can configure parameters for 3G function on the screen below. To use the 3G function, you should first insert your USB modem on the USB port of the Router. There are already much 3G USB modem information embedded in the
  • TP-Link TL-MR3220 | User Guide - Page 35
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-6 3G Figure 4-7 ¾ Location - Please select the location where you're enjoying the 3G card. ¾ Mobile ISP - Please select the ISP (Internet Service Provider) you apply to for 3G service. The router will show the default Dial Number and APN of that ISP
  • TP-Link TL-MR3220 | User Guide - Page 36
    TL-MR3220 3G/3.75G Wireless Lite N Router ¾ Set the Dial Number and APN manually - Check the box and fill the Dial Number and APN blanks below if your ISP is not listed in the Mobile ISP list or the default values are not the latest ones. ¾ Dial Number - Enter the Dial Number provided by your ISP. ¾
  • TP-Link TL-MR3220 | User Guide - Page 37
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-8 -30-
  • TP-Link TL-MR3220 | User Guide - Page 38
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-9 ¾ Connect on Demand - You can configure the Router to disconnect your Internet Connect Manually - You can configure the Router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the Router will
  • TP-Link TL-MR3220 | User Guide - Page 39
    TL-MR3220 3G/3.75G Wireless Lite N Router ¾ MTU Size - The default MTU ( list. We suggest you to do the "3G USB Modem Setting" only in such circumstance. To add 3G USB Modem entries, follow the steps below. 1. Download a most recent 3G USB modem configuration file from our website (http://www.tp-link
  • TP-Link TL-MR3220 | User Guide - Page 40
    TL-MR3220 3G/3.75G Wireless Lite N Router 4. Click the Upload button to upload the configuration. Figure 4-11 Add or Modify a 3G USB Modem Entry 4.5.3 WAN Choose menu "Network→WAN", you can configure the IP parameters of the WAN on the screen below. ) Note: WAN settings are unavailable when the
  • TP-Link TL-MR3220 | User Guide - Page 41
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-12 WAN - Dynamic IP This page displays the WAN IP your ISP. ) Note: If you get Address not found error when you access a Web site, it is likely that your DNS servers are set up improperly. You should contact your ISP to get DNS server addresses. ¾
  • TP-Link TL-MR3220 | User Guide - Page 42
    TL-MR3220 3G/3.75G Wireless Lite N Router applications. If you cannot get the IP Address normally, you can choose this option. (It is rarely required.) 2. If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select Static IP. The Static IP settings page will
  • TP-Link TL-MR3220 | User Guide - Page 43
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-14 WAN - PPPoE ¾ User Name/Password - Enter the User connect to the local area network provided by ISP. ¾ Connect on Demand - In this mode, the Internet connection can be terminated automatically after a specified inactivity period (Max Idle Time)
  • TP-Link TL-MR3220 | User Guide - Page 44
    TL-MR3220 3G/3.75G Wireless Lite N Router ¾ Connect configured the system time on System Tools -> Time page, will the Time-based Connecting function can take effect. ¾ Connect Manually - You can click the Connect/ Disconnect button to connect/disconnect immediately. This mode also supports
  • TP-Link TL-MR3220 | User Guide - Page 45
    TL-MR3220 3G/3.75G Wireless Lite N Router should not be configured unless you are sure it is necessary for your ISP. In most cases, leaving these fields blank will work. ¾ ISP Specified IP Address - If your ISP does not automatically assign IP addresses to the Router during login, please click "Use
  • TP-Link TL-MR3220 | User Guide - Page 46
    TL-MR3220 3G/3.75G Wireless Lite N Router Manually - You can click the Connect/Disconnect button to connect/disconnect immediately. This mode also supports the Max Idle Time function as Connect on Demand mode . Click the Save button to save your settings. 5. If your ISP provides L2TP connection,
  • TP-Link TL-MR3220 | User Guide - Page 47
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-17 L2TP Settings ¾ User Name/Password - Enter the User Name and Disconnect button to disconnect immediately. ¾ Connect on Demand - You can configure the Router to disconnect from your Internet connection after a specified period of inactivity (
  • TP-Link TL-MR3220 | User Guide - Page 48
    TL-MR3220 3G/3.75G Wireless Lite N Router ¾ Connect Automatically - Connect automatically after the Router is disconnected. To use this option, click the radio button. ¾ Connect Manually - You can configure the Router to make it connect or disconnect manually. After a specified period of inactivity
  • TP-Link TL-MR3220 | User Guide - Page 49
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-18 PPTP Settings ¾ User Name/Password - Enter the User Name and Disconnect button to disconnect immediately. ¾ Connect on Demand - You can configure the Router to disconnect from your Internet connection after a specified period of inactivity (
  • TP-Link TL-MR3220 | User Guide - Page 50
    TL-MR3220 3G/3.75G Wireless Lite N Router has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your
  • TP-Link TL-MR3220 | User Guide - Page 51
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-19 MAC Address Clone Some ISPs require that you register the MAC Address of your adapter. Changes are rarely needed here. ¾ WAN MAC Address - This field displays the current MAC address of the WAN port. If your ISP requires you to register the MAC
  • TP-Link TL-MR3220 | User Guide - Page 52
    TL-MR3220 3G/3.75G Wireless Lite N Router (factory default: 192.168.1.1). ¾ Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. ) Note: 1) If you change the IP Address of LAN, you must use the new IP Address to login the Router. 2) If
  • TP-Link TL-MR3220 | User Guide - Page 53
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-22 Wireless Settings ¾ SSID - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default SSID is set to
  • TP-Link TL-MR3220 | User Guide - Page 54
    TL-MR3220 3G/3.75G Wireless Lite N Router ¾ Channel - This field determines which operating frequency will be used. The default channel is set to Auto, so the AP will choose the best channel automatically. It is not necessary to change the wireless channel unless you notice interference problems
  • TP-Link TL-MR3220 | User Guide - Page 55
    TL-MR3220 3G/3.75G Wireless Lite N Router ¾ SSID(to be bridged) - The SSID of the AP your Router is going to connect to as a client. You can also use the search function to select the SSID to join. ¾ BSSID(to be bridged) - The BSSID of the AP your Router is going to connect to as a client. You can
  • TP-Link TL-MR3220 | User Guide - Page 56
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-23 ¾ Disable Security - If you do not want to use wireless security, select this check box, but it's strongly recommended to choose one of the following modes to enable security. ¾ WEP - It is based on the IEEE 802.11 standard. If you select this
  • TP-Link TL-MR3220 | User Guide - Page 57
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-24 • Type - you can choose the type for the WEP security on the pull-down list. The default setting is Automatic, which can select Open System or Shared Key authentication type automatically based on the wireless station's capability and request. •
  • TP-Link TL-MR3220 | User Guide - Page 58
    TL-MR3220 3G/3.75G Wireless Lite N Router • Encryption - You can select either Automatic, or update. ¾ WPA-PSK/WPA2-PSK - It's the WPA/WPA2 authentication type based on pre-shared passphrase. • Version - you can choose the version of the WPA-PSK security on the drop-down list. The default setting
  • TP-Link TL-MR3220 | User Guide - Page 59
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-26 • PSK Passphrase - You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters. • Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the
  • TP-Link TL-MR3220 | User Guide - Page 60
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-28 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X
  • TP-Link TL-MR3220 | User Guide - Page 61
    TL-MR3220 3G/3.75G Wireless Lite N Router 2. Select the radio button: Deny the stations not specified by any enabled entries in the list to access for Filtering Rules. 3. Delete all or disable all entries if there are any entries already. 4. Click the Add New... button and enter the MAC address 00-
  • TP-Link TL-MR3220 | User Guide - Page 62
    TL-MR3220 3G/3.75G Wireless Lite N Router ¾ Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here. The beacons are the packets sent by the router to synchronize a wireless since excessive packets. 2346 is the default setting and is recommended. ¾ DTIM Interval -
  • TP-Link TL-MR3220 | User Guide - Page 63
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-30 The Router attached wireless stations ¾ MAC Address - The connected wireless station's MAC address ¾ Current Status - The connected wireless station's running status, one of STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP
  • TP-Link TL-MR3220 | User Guide - Page 64
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-32 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually of the LAN port of the Router, default value is
  • TP-Link TL-MR3220 | User Guide - Page 65
    TL-MR3220 3G/3.75G Wireless Lite N Router ) Note: To use the DHCP server function of the Router, you must configure all computers on the LAN as "Obtain an IP Address automatically" mode. 4.7.2 DHCP Clients List Choose menu "DHCP→DHCP Clients List", you can view the information about the clients
  • TP-Link TL-MR3220 | User Guide - Page 66
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-34 Address Reservation ¾ MAC Address - The MAC address of the PC for which you want to reserve IP address. ¾ Assigned IP Address - The IP address of the Router reserved. ¾ Status - The status of this entry either Enabled or Disabled. To Reserve IP
  • TP-Link TL-MR3220 | User Guide - Page 67
    TL-MR3220 3G/3.75G Wireless Lite N Router Click the Delete All button to delete all entries Click the Next button to go to the next page and Click the Previous button to return the previous page. 4.8 Forwarding Figure 4-36 The Forwarding menu There are four submenus under the Forwarding menu (shown
  • TP-Link TL-MR3220 | User Guide - Page 68
    TL-MR3220 3G/3.75G Wireless Lite N Router ¾ Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols supported by the Router). ¾ Status - The status of this entry either Enabled or Disabled. To setup a virtual server entry: 1. Click the Add New... button. (pop-up
  • TP-Link TL-MR3220 | User Guide - Page 69
    TL-MR3220 3G/3.75G Wireless Lite N Router Click the Next button to go to the next page and click the Previous button to return the previous page. ) Note: If you set the service port of the virtual server as 80, you must set the Web management port on System Tools -> Remote Management page to be any
  • TP-Link TL-MR3220 | User Guide - Page 70
    TL-MR3220 3G/3.75G Wireless Lite N Router Every group of ports must be set apart with ",". For example, 2000-2038, 2050-2051, 2085, 3010-3030. ¾ Incoming Protocol - The protocol used for Incoming Ports Range, either TCP or UDP, or ALL (all protocols supported by the Router). ¾ Status - The status of
  • TP-Link TL-MR3220 | User Guide - Page 71
    TL-MR3220 3G/3.75G Wireless Lite N Router Click the Disabled All button to make all entries disabled. Click the Delete All button to delete all entries ) Note: 1) When the trigger connection is released, the according opening ports will be closed. 2) Each rule allowed to be used only by one host on
  • TP-Link TL-MR3220 | User Guide - Page 72
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-42 UPnP Setting ¾ Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or Disable button. As allowing this may present a risk to security, this feature is enabled by default. ¾ Current UPnP Settings List - This table displays
  • TP-Link TL-MR3220 | User Guide - Page 73
    TL-MR3220 3G/3.75G Wireless Lite N Router 4.9.1 Basic Security Choose menu "Security → Basic Security", you can configure the basic security in the screen as shown in Figure 4-37. Figure 4-44 Basic Security ¾ Firewall - A firewall protects your network from the outside world. Here
  • TP-Link TL-MR3220 | User Guide - Page 74
    TL-MR3220 3G/3.75G Wireless Lite N Router the use of cryptographic security services. To allow IPSec tunnels to pass through the Router, keep the default, Enabled. ¾ ALG - It is recommended to enable Application Layer Gateway (ALG) because ALG allows customized Network Address Translation (NAT)
  • TP-Link TL-MR3220 | User Guide - Page 75
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-45 Advanced Security ¾ Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-down list number is beyond the set value, the Router will startup the blocking function immediately. -68-
  • TP-Link TL-MR3220 | User Guide - Page 76
    TL-MR3220 3G/3.75G Wireless Lite N Router ¾ Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering. ¾ UDP-FLOOD Packets Threshold (5~3600) - The default value is 500. Enter a value between 5 ~ 3600. When the current UPD-FLOOD Packets number is beyond the set value, the Router will
  • TP-Link TL-MR3220 | User Guide - Page 77
    TL-MR3220 3G/3.75G Wireless Lite N Router By default, the radio button "All the PCs on the LAN are allowed to access the Router's Web-Based Utility" is checked. If you want to allow PCs with specific MAC Addresses to access the Setup page of the Router's Web-Based Utility locally from inside the
  • TP-Link TL-MR3220 | User Guide - Page 78
    TL-MR3220 3G/3.75G Wireless Lite N Router address (in IE) or Location (in Navigator) box, followed by a colon and the custom port number. For example, if your Router's WAN address is 202.96.12.8, and the port number used is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may
  • TP-Link TL-MR3220 | User Guide - Page 79
    TL-MR3220 3G/3.75G Wireless Lite N Router To add a new entry, please follow the steps below. 1. Click the Add New... button and the next screen will pop-up as shown in Figure 4-49. 2. Enter the MAC address of the PC (e.g. 00-11-22-33-44-AA) you'd like to control in the MAC -down list the Settings
  • TP-Link TL-MR3220 | User Guide - Page 80
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-49 Add or Modify Parental Control Entry For example: If you desire that the child PC with MAC address 00-11-22-33-44-AA can access www.google.com on Saturday only while the parent PC with MAC address 00-11-22-33-44-BB is without any restriction, you
  • TP-Link TL-MR3220 | User Guide - Page 81
    TL-MR3220 3G/3.75G Wireless Lite N Router z Select "Schedule_1" you create just now from the Effective Time drop-down list. z In Status field, select Enable. 4. Click Save to complete the settings. Then you will go back to the Parental Control Settings page and see the following list, as shown in
  • TP-Link TL-MR3220 | User Guide - Page 82
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-52 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access drop-down list or choose "Click Here To Add New Host List". 4. Select a target from the Target drop-sown list or choose "Click
  • TP-Link TL-MR3220 | User Guide - Page 83
    TL-MR3220 3G/3.75G Wireless Lite N Router 5. Select a schedule from the Schedule drop-down list or choose "Click Here To Target_1 and Domain Name is www.google.com. 3. Click "Access Control → Schedule" in the left to enter the Schedule Settings page. Add a new entry with the Schedule Description is
  • TP-Link TL-MR3220 | User Guide - Page 84
    TL-MR3220 3G/3.75G Wireless Lite N Router 4. Click "Access Control → Rule" in the left to return to the Access Control Rule Management page. Select "Enable Internet Access Control" and choose "Deny the packets not specified by any access control policy to pass through the Router". 5. Click Add New
  • TP-Link TL-MR3220 | User Guide - Page 85
    TL-MR3220 3G/3.75G Wireless Lite N Router z If you select IP Address, the screen shown is Figure 4-55. 1) In Host Description field, create a unique description for the host (e.g. Host_1). 2) In LAN IP Address field, enter the IP address. z If you select MAC Address, the screen shown is Figure 4-56.
  • TP-Link TL-MR3220 | User Guide - Page 86
    TL-MR3220 3G/3.75G Wireless Lite N Router 4.11.3 Target Choose menu "Access Control → Target", you can view and set a Target list in the screen as shown in Figure 4-57. The target list is necessary for the Access Control Rule. Figure 4-57 Target Settings ¾ Target Description - Here displays the
  • TP-Link TL-MR3220 | User Guide - Page 87
    TL-MR3220 3G/3.75G Wireless Lite N Router 3. Click the Save button. Click the Delete All button to delete all the entries in the table. Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 4-58 Add or Modify an Access Target Entry Figure 4-59
  • TP-Link TL-MR3220 | User Guide - Page 88
    TL-MR3220 3G/3.75G Wireless Lite N Router 3. In Target Description field, create a unique description for the target (e.g. Target_1). 4. In Domain Name field, enter www.google.com. 5. Click Save to complete the settings. Then you will go back to the Target Settings page and see the following list.
  • TP-Link TL-MR3220 | User Guide - Page 89
    TL-MR3220 3G/3.75G Wireless Lite N Router Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 4-61 Advanced Schedule Settings For example: If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA to access
  • TP-Link TL-MR3220 | User Guide - Page 90
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-62 Static Routing To add static routing entries: 1. Click the Router and the network or host. 3. Select Enabled or Disabled for this entry on the Status pull-down list. 4. Click the Save button to make the entry take effect. Other configurations for
  • TP-Link TL-MR3220 | User Guide - Page 91
    TL-MR3220 3G/3.75G Wireless Lite N Router settings can take effect. ¾ Line Type - Select the right type for you network connection. If you don't know how to choose, please ask your ISP for the information. ¾ Egress Bandwidth - The upload speed through the WAN port. ¾ Ingress Bandwidth - The download
  • TP-Link TL-MR3220 | User Guide - Page 92
    TL-MR3220 3G/3.75G Wireless Lite N Router 4.13.2 Rules List Choose menu "Bandwidth Control → Rules List", you can view and configure the Bandwidth Control rules in the screen below. Figure 4-66 Bandwidth Control Rules List ¾ Description - This is the information about the rules such as address range
  • TP-Link TL-MR3220 | User Guide - Page 93
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-67 Bandwidth Control Rule Settings Step 3: Click the Save button. 4.14 IP & MAC Binding Setting Figure 4-68 the IP & MAC Binding menu There are two submenus under the IP &MAC Binding menu (shown in Figure 4-68): Binding Setting and ARP List. Click
  • TP-Link TL-MR3220 | User Guide - Page 94
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-69 Binding Setting ¾ MAC Address - The MAC address of the controlled computer in the LAN. ¾ IP Address - The assigned IP address of the controlled computer in the LAN. ¾ Bind - Check this option
  • TP-Link TL-MR3220 | User Guide - Page 95
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-71 Find IP & MAC Binding Entry Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 4.14.2 ARP List To manage the computer, you could observe the computers in the LAN by checking the
  • TP-Link TL-MR3220 | User Guide - Page 96
    TL-MR3220 3G/3.75G Wireless Lite N Router Click the Bind All button to bind all the current items, available after enable. Click the Load All button to load all items to the IP & MAC Binding list. Click the Refresh button to refresh all items. ) Note: An item could not be loaded to the IP & MAC
  • TP-Link TL-MR3220 | User Guide - Page 97
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-73 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. Type the Domain Name received from your dynamic DNS service provider. 2. Type the User Name for your DDNS account. 3. Type the Password for your DDNS account. 4. Click the
  • TP-Link TL-MR3220 | User Guide - Page 98
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-74 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. Type the User Name for your DDNS account. 2. Type the Password for your DDNS account. 3. Type the Domain Name you received from dynamic DNS service provider here. 4. Click
  • TP-Link TL-MR3220 | User Guide - Page 99
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-75 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: 1. Type the User Name for your DDNS account. 2. Type the Password for your DDNS account. 3. Type the Domain Name you received from dynamic DNS service provider. 4. Click the
  • TP-Link TL-MR3220 | User Guide - Page 100
    TL-MR3220 3G/3.75G Wireless Lite N Router Settings, Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Reboot, Password, System Log and Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided
  • TP-Link TL-MR3220 | User Guide - Page 101
    TL-MR3220 3G/3.75G Wireless Lite N Router your time zone once you login to the router successfully, otherwise, these functions will not take effect. 2) The time will be lost if the router is turned off. 3) The router Ping - This diagnostic tool troubleshoots connectivity, reachability, and name
  • TP-Link TL-MR3220 | User Guide - Page 102
    TL-MR3220 3G/3.75G Wireless Lite N Router name is not, you might have a name resolution problem. In this case, ensure for Tracert function. 4.16.3 Firmware Upgrade Choose menu "System Tools → Firmware Upgrade", you can update the latest version of firmware for the Router on the following screen. -95
  • TP-Link TL-MR3220 | User Guide - Page 103
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-80 Firmware Upgrade ¾ Firmware Version - This displays the current firmware version. ¾ Hardware Version - This displays the current hardware version. The hardware version of the upgrade file must accord with the Router's current hardware version. To
  • TP-Link TL-MR3220 | User Guide - Page 104
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-81 Restore Factory Default Click the Restore button to reset all configuration settings to their default values. • The default User Name: admin • The default Password: admin • The default IP Address: 192.168.1.1 • The default Subnet Mask: 255.255.
  • TP-Link TL-MR3220 | User Guide - Page 105
    Change the DHCP Settings. • Change the Wireless configurations. • Change the Web Management Port. • Upgrade the firmware of the Router (system will reboot automatically). • Restore the Router's settings to factory defaults (system will reboot automatically). • Update the configuration with the file
  • TP-Link TL-MR3220 | User Guide - Page 106
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-84 Password It is strongly recommended that you should change the factory default user name and password of the Router, because all users who try to access the Router's Web-based utility or Quick Setup will be prompted for the Router's default user
  • TP-Link TL-MR3220 | User Guide - Page 107
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure 4-86 Mail Account Settings z From - Your mail box address. The Router would connect it to send logs. z in the corresponding field as shown in Figure 4-86 Click Save to keep your settings. Click Back to return to the previous page. ¾ Log Type - By selecting
  • TP-Link TL-MR3220 | User Guide - Page 108
    TL-MR3220 3G/3.75G Wireless Lite N Router ¾ Log Level - By selecting the log level, only logs of this level will be shown. ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file. ¾ Mail Log - Click to send an email of current logs manually
  • TP-Link TL-MR3220 | User Guide - Page 109
    TL-MR3220 3G/3.75G Wireless Lite N Router Click Reset All to reset the values of all the entries to zero. Click Delete All to delete all entries in the table. Statistics Table: IP/MAC Address The IP and MAC address are displayed with related statistics. Total The total number of packets received
  • TP-Link TL-MR3220 | User Guide - Page 110
    TL-MR3220 3G/3.75G Wireless Lite N Router Appendix A: FAQ 1. How do I configure the Router to access Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router. The telephone cord
  • TP-Link TL-MR3220 | User Guide - Page 111
    TL-MR3220 3G/3.75G Wireless Lite N Router 1) Login to the Router, click the "Network" menu on the left of your browser, and click "WAN" submenu. On the WAN page, select "Dynamic IP" for "WAN Connection Type", finish by clicking "Save". 2) Some ISPs require that you register the MAC Address of your
  • TP-Link TL-MR3220 | User Guide - Page 112
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP, which is displayed on the "Status" page. 4) How to enable DMZ Host: Log in to the Router, click the "Forwarding" menu on the left of your browser, and click "
  • TP-Link TL-MR3220 | User Guide - Page 113
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure A-7 Basic Security 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will interfere with the WEB management port 80 on the Router, you must change the WEB management port number to avoid interference. 2)
  • TP-Link TL-MR3220 | User Guide - Page 114
    TL-MR3220 3G/3.75G Wireless Lite N Router field of the Web browser. 3) Log in to the Router, click the "Forwarding" menu on the left of your browser, and click the "Virtual Servers" submenu. On the "Virtual Servers" page, click Add New..., then on the "Add
  • TP-Link TL-MR3220 | User Guide - Page 115
    TL-MR3220 3G/3.75G Wireless Lite N Router Appendix B: Configuring the PCs In this section, we'll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter's manual if needed. 1. Install TCP/IP component 1) On the
  • TP-Link TL-MR3220 | User Guide - Page 116
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure B-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Now you have two ways to configure the TCP/IP protocol below: ¾ Setting IP address automatically Select Obtain an IP address
  • TP-Link TL-MR3220 | User Guide - Page 117
    TL-MR3220 3G/3.75G Wireless Lite N Router Figure B-3 ¾ Setting IP address manually 1 Select Use the following IP address radio button. And the following items available 2 If the Router's LAN IP address is 192.168.1.1, type IP address is 192.168.1.x (x is from 2 to 254), and Subnet mask is 255.255.
  • TP-Link TL-MR3220 | User Guide - Page 118
    TL-MR3220 3G/3.75G Wireless Lite N Router Now click OK to keep your settings. Figure B-4 -111-
  • TP-Link TL-MR3220 | User Guide - Page 119
    TL-MR3220 3G/3.75G Wireless Lite N Router Appendix C: Specifications General Standards Protocols Ports IEEE 802.3, 802.3u, 802.11b, 802.11g and 802.11n TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M Auto-Negotiation LAN RJ45 ports supporting Auto MDI
  • TP-Link TL-MR3220 | User Guide - Page 120
    TL-MR3220 3G/3.75G Wireless Lite N Router Appendix D: Glossary compatibility with IEEE 802.11b devices, and WEP encryption for security. ¾ DDNS (Dynamic Domain Name System) - The capability of assigning a fixed host and domain name to a dynamic Internet IP Address. ¾ DHCP (Dynamic Host Configuration
  • TP-Link TL-MR3220 | User Guide - Page 121
    TL-MR3220 3G/3.75G Wireless Lite N Router connection. ¾ SSID - A Service Set Identification is a thirty-two character (maximum) alphanumeric key identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the
  • TP-Link TL-MR3220 | User Guide - Page 122
    TL-MR3220 3G/3.75G Wireless Lite N Router Appendix E: Compatible 3G/3.75G USB Modem The UMTS/HSPA/EVDO USB modems we've tested in the field are listed below. You can find the latest compatibility list in our website: http://www.tp-link.com. Compatible 3G/3.75G USB Modem (Tested in the field)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
TL-MR3220
3G/3.75G Wireless Lite N Router
Rev: 1.0.0
1910010350