TP-Link TL-PA2010PKIT TL-PA2010PKIT V1 Quick Install Guide 7106504066 - Page 1

TP-LINK® The Reliable Choice Package Contents Quick Installation Guide AV200 Powerline Adapter with AC Pass Through Powerline Adapter* QIG CID Resource CD Ethernet Cable *The provided power plug may differ from the picture due to different regional power specifications. Here we take the EU version as an example. Warning on Final Location 7106504066 MODEL NO. TL-PA201012 • NOTE: It's strongly recommended that you plug the adapter directly into the wall socket, for some power strips have surge protector which can filter data. 7 LEDandButtonDescriptions Integrated Electrical Socket Power LED Powerline LED Ethernet LED Pair Button Item Status Description el,P Power LED Solid The adapter is on. Blinking The adapter e. is in power-saving mode or in pairing Off The adapter is off. Solid The adapter is connected to a powerline network. i i Powerline LED Blinking The adapter is transferring data. The adapter isn't connected to any powerline network Off or is in power-saving mode.* The Ethernet port is connected, but there is no data Solid being transferred. Ethernet LED Blinking The Ethernet port is transferring data. Off The Ethernet port isn't connected. Five minutes after the device connected to the adapter is turned off, the adapter will automatically switch to power-saving mode. Item Pair Button Integrated Electrical Socket Description Pair button is used to secure a powerline network. To secure your network, please refer to Appendix: Using the Pair Button. The integrated electrical socket allows additional devices or multiple sockets to be connected to the adapter just like to a normal wall socket. No electrical socket is lost. 2 NetworkInstallation B Internet w After taking the steps above, you can surf the Internet. To add another adapter Plug an additional adapter into the wall socket, and the connection will be established automatically within 60 seconds. NOTE: 1. To surf the Internet, please make sure that your network is properly connected to the Internet. 2. If the adapters fail to automatically link to each other, you can establish a private group by using the pair button. To set up a private group, please go to Appendix Using the Pair Button for detailed instructions.