TP-Link TL-PA4010KIT TL-PA4010 V1.0 User Guide - Page 24

TL-PA4010

AV500 Nano Powerline Adapter

18



Simple Application Mapping:

The group allows you to choose what type of traffic with the highest

user priority you will use your local HomePlug device for by pitching one of the following radios.

Please select the radio type according to your demand.



Advanced Priority Mapping:

The group sets VLAN priority to CAP mapping and default priority.

Note that in HomePlug, CAP 3 is the highest priority while CAP 0 is the lowest priority. The values

shown in VLAN Tags Priority are the default settings for the first running.

4.4 System

The

System

tab window is for some basic settings of the adapter. On this tab window, you can upgrade

the firmware to the latest version, reset the adapter’s settings to the factory defaults and configure all

adapters’ network names.

Section	Page
Package Contents	7
Chapter 1 Introduction	8
1.1 Conventions	8
1.2 System Requirement	8
1.3 Important Safety Instructions	8
Chapter 2 Connecting Mechanism	10
2.1 Introduction	10
2.2 LED Indicator	10
2.3 Physical Interface	11
2.4 Connection Instruction	12
2.5 Hardware Connection – Computer	12
2.6 Hardware Connection – Internet	13
Chapter 3 Installing Management Utility	15
Chapter 4 Using the Management Utility	19
4.1 Status	19
4.1.1 Set Local Device’s Network Name	20
4.2 Network	21
4.2.1 Rename the Remote Device/Enter Password	22
4.2.2 Add Device	22
4.3 Advanced	23
4.4 System	24
4.4.1 Upgrade Firmware	25
4.4.2 Reset Device	26
4.4.3 Set All Devices’ Network Name	26
Chapter 5 Advanced Feature: How to Use the Pair Buttons	27
5.1 Pair ( Secure with 128 bits-AES)	27
5.2 Set Up a Powerline AV Network with the Pair Button	27

TP-Link TL-PA4010KIT TL-PA4010 V1.0 User Guide - Page 24

System, TL-PA4010, Simple Application Mapping, Advanced Priority Mapping, System

Page 24 highlights