TP-Link TL-PA7020 KIT TL-PA7020 KITEU V1 User Guide - Page 8

TL-PA7020 AV1000 2-port Gigabit Powerline Adapter The hardware connection mechanism is shown below:  Note: Do not connect the powerline adapter to any extension lead, power strip, extension cord or surge protector, as this may degrade the network performance. 2.4 Hardware Connection - Internet This section describes how to connect the powerline adapter into your existing ADSL broadband connection via ADSL Ethernet port. Follow the procedures described below to connect the powerline adapter to your ADSL broadband connection: 1．Connect one end of the provided Ethernet (RJ45) cable to an Ethernet port of the powerline adapter. 2．Connect the other end of the Ethernet (RJ45) cable to an available Ethernet port of your ADSL broadband Router. 3．Plug the powerline adapter into a wall socket next to the router. 4．Check and confirm that the Power LED , Ethernet LED powerline adapter are ON.  Note: If any LED does not turn on, refer to Appendix: Troubleshooting. , and Powerline LED on the 6