TP-Link TL-R600VPN TL-R600VPN V1 QIG 7106503723 - Page 1
TP-Link TL-R600VPN Manual
View all TP-Link TL-R600VPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Package Contents 1 Physical Description • Front Panel Quick Installation Guide Gigabit Broadband VPN Router TL-R600VPN MODEL NO. TL-R600VPN Ethernet Cable Power Cord Resource CD Gigabit Broadband VPN Router MODEL NO. TL-R600VPN QIG The provided power cord may differ from the figure above due to local power specifications. 2 Hardware Connection 1 Connect the WAN port of the Router to the Cable or DSL Modem via Ethernet cable. Here we take the ADSL Modem from TP-LINK as an example. 2 Connect a LAN port of the Router to the computer by Ethernet cable. 3 Connect one end of the AC power cord to the AC power socket on the Router, and the other end into an electrical outlet. The Router will work automatically and the LED will display as the LED Descriptions shown. • Back Panel • LED Descriptions Name PWR SYS Status On (Green) O Flashing (Green) On/O On (Green/Yellow) WAN, LAN Flashing (Green/Yellow) O Indication The Router is powered on The Router is powered o The Router works properly The Router has a hardware error There is a device linked to the corresponding port but not active (Green light indicates the linked device is running at 1000Mbps, and yellow indicates the linked device is running at 10/100Mbps.) The corresponding port is transmitting or receiving data (Green light indicates the linked device is running at 1000Mbps, and yellow indicates the linked device is running at 10/100Mbps.) There is no device linked to the corresponding port 3 PC Con guration 1 For Windows XP/2000: Click "Start" "Control Panel" "Network and Internet Connections" "Network Co.nnections", and then find "Local AreaConnection" icon and right click it. Then click "Properties". 2 Select "Internet Protocol (TCP/I"P) "/"Internet Protocol Version 4 (TCP/IPv4)" and click " Properties". 7106503723 TL-R600VPN 3 TD-8816 Internet 2 1 For Windows Vista/7: Click "Start" "Control Panel" "View network status and tasks". For Windows Vista For Windows 7 FFoor rWWininddoowwssXXPP/2/2000000 For Windows 7/Vista 3 Select "Obtain an IP address automatically " and "Obtain DNS server address automatically". Then click "OK". Click "View Status" Click "Local Area Connection" For Windows Vista/7, click "Properties" on the Pop-up after the steps above. For Windows XP/2000 For Windows 7/Vista