TP-Link TL-R600VPN TL-R600VPN V1 QIG 7106503723 - Page 2

Appendix: Troubleshooting - setup

Page 2 highlights

4 1 Login Open web browser and type in http://192.168.0.1. Press Enter button and then enter the User name and Password (Factory Default: admin/admin), and click OK. 2 Connect to Internet After a successful login, select the Quick Setup tab on the left of the main menu and the "Quick Setup" screen will appear. Then click Next. Auto-Detect: If Auto-Detect is chosen, the Router will detect the connection type provided by your ISP automatically. PPPoE: If you choose PPPoE, enter the User Name and Password provided by your ISP. Then click Next. Static IP: If you choose Static IP, type in the IP address information provided by your ISP. Then click Next. Select the appropriate connection type according to the information from your ISP. Then click Next. For other connection type, you can go to "Network" "WAN ". Dynamic IP: If you choose Dynamic IP, the Router will automatically obtain the IP parameters from your ISP. Now you can see the following screen. Click Finish to complete the quick installation. Appendix: Troubleshooting its factory default settings? With the Router powered on, use a pin to press and hold the RESET button (about 5 seconds) until the SYS LED lights up and ashes quickly. And then release the button and wait for the Router rebooting to its factory default settings. What could I do if I forget the user name and password of the Router? you can restore the Router to factory defaults. The default management address of the Router is http://192.168.0.1, the default username and password are both admin. All your current settings will be cleared after the Router is restored. If you have backup con guration, please import it now. Why does the PWR LED work abnormally? The PWR LED should be lit up when the power system works normally. If the PWR LED worked abnormally, please check as follows: 1) Make sure that the power cable is connected properly, and the power contact is normal. 2) Make sure the voltage of the power supply meets the requirement of the input voltage of the Router. What should I do if I could not access the You are recommended to check the following items: 1) Check every port LED on the Router and make sure the cable is installed properly. 2) Try another port on the Router and make sure the cable meets the requirement and works normally. 3) Turn o the power. After a while, turn on the power again. 4) Make sure the IP address of your PC is set within the subnet of the Router. 5) If you still cannot access the con guration page, please restore the Router to its factory defaults. Then the IP address should be set as 192.168.0.x ("x" is any number from 2 to 254) and Subnet Mask as 255.255.255.0. Why does the page display abnormally? Please check as follows: 1) Update your browser or replace it with another browser, and try again. 2) If the pop-up is blocked, please lower the security level of the browser. Technical Support For more troubleshooting help, go to www.tp-link.com/support/faq.asp To download the latest Firmware, Driver, Utility and User Guide, go to www.tp-link.com/support/download.asp For all other technical support, please contact us by using the following details. Global Tel: +86 755 26504400 E-mail: [email protected] Service time: 24 hrs, 7 days a week Singapore Tel: +65 62840493 E-mail: [email protected] Service time: 24 hrs, 7 days a week UK Tel: +44 (0) 845 147 0017 E-mail: [email protected] Service time: 24 hrs, 7 days a week USA/Canada Toll Free: +1 866 225 8139 E-mail: [email protected] Service time: 24 hrs, 7 days a week Malaysia Tel: 1300 88 875465 (1300 88TPLINK) E-mail: [email protected] Service time: 24 hrs , 7 days a week Switzerland Tel: +41 (0)848 800998 (German service) E-mail: [email protected] Fee: 4-8 Rp/min, depending on Service time: Monday to Friday 9:00 AM to 6:00 PM. GMT+1 or GMT+2 (Daylight Saving Time) Australia & New Zealand Tel: AU 1300 87 5465 NZ 0800 87 5465 E-mail: [email protected] Service time: 24 hrs, 7 days a week Turkey Tel: 444 19 25čTurkish ServiceĎ E-mail: [email protected] Service time: 9:00 AM to 6:00 PM, 7 days a week Italy Tel: +39 02 66987799 E-mail: [email protected] Service time: 9:00 AM to 6:00 PM, Monday to Friday Indonesia Tel: (+62 ) 021 6259 135 E-mail: [email protected] Service time: Monday to Friday 9:00 -12:00 ; 13:00 -18:00 *Except public holidays Germany/Austria Tel: +49 1805 875465 (German Service)/+49 1805 TPLINK E-mail: [email protected] Fee: 0.14 EUR/min from the German 0.42 EUR/min from mobile phone. Service Time: Monday to Friday 9:00 AM to 6:00 PM GMT+1 or GMT+2 (Daylight Saving Time in Germany) * Except bank holidays in Hesse TP-LINK TECHNOLOGIES CO., LTD. www.tp-link.com

  • 1
  • 2

4
Appendix: Troubleshooting
its factory default settings?
1
2
Open web browser and type in
. Press
Enter
button and then enter the User name and Password
(Factory Default:
admin/admin
), and click
OK
.
After
a successful login, select the
Quick Setup
tab on
the left of the main menu and the “
Quick Setup
” screen
will appear.
Then click
Next
.
Select the appropriate connection type according to the
information from your ISP. Then click
Next
.
Dynamic IP
: If you choose Dynamic IP,
the Router will
automatically obtain the IP parameters from
your ISP.
With the Router powered on, use a pin to press and hold the
RESET
button (about 5 seconds) until the SYS LED lights up
and flashes quickly. And then release the button and wait for
the Router rebooting to its factory default settings.
you can restore the Router to factory defaults. The default
management address of the Router is http://192.168.0.1, the
default username and password are both admin. All your
current settings will be cleared after the Router is restored.
If you have backup configuration, please import it now.
Why does the PWR LED work abnormally?
The PWR LED should be lit up when the power system works
normally. If the PWR LED worked abnormally, please check
as follows:
1)
Make sure that the power cable is connected properly,
and the power contact is normal.
2)
Make sure the voltage of the power supply meets the
requirement of the input voltage of the Router.
Why does the page display abnormally?
Please check as follows:
1)
Update your browser or replace it with another browser,
and try again.
2)
If the pop-up is blocked, please lower the security level
of the browser.
What should I do if I could not access the
You are recommended to check the following items:
1)
Check every port LED on the Router and make sure the
cable is installed properly.
2)
Try another port on the Router and make sure the cable
meets the requirement and works normally.
3)
Turn off the power. After a while, turn on the power
again.
Make sure the IP address of your PC is set within the
subnet of the Router.
4)
If you still cannot access the configuration page, please
restore the Router to its factory defaults. Then
the IP
address should be set as 192.168.0.x (“x” is any number
from 2 to 254) and Subnet Mask as 255.255.255.0.
5)
TP-LINK TECHNOLOGIES CO., LTD.
www.tp-link.com
Technical Support
www.tp-link.com/support/faq.asp
For more troubleshooting help, go to
www.tp-link.com/support/download.asp
To download the latest Firmware, Driver, Utility and User Guide, go to
For all other technical support, please contact us by using the
Tel: +44 (0) 845 147 0017
Service time: 24 hrs, 7 days a week
UK
Tel: +65 62840493
Singapore
Service time: 24 hrs, 7 days a week
Service time: 24 hrs, 7 days a week
Tel: +86 755 26504400
Global
Service time: 24 hrs, 7 days a week
Toll Free: +1 866 225 8139
USA/Canada
Fee: 0.14 EUR/min from the German
0.42 EUR/min from mobile phone.
Service Time: Monday to Friday
9:00 AM to 6:00 PM
GMT+1 or GMT+2
(Daylight Saving Time in Germany)
* Except bank holidays in Hesse
Tel: +49 1805 875465 (German
Service)/+49 1805 TPLINK
Germany/Austria
Service time: 24 hrs, 7 days a week
NZ 0800 87 5465
Tel: AU 1300 87 5465
Australia & New Zealand
Tel: +41 (0)848 800998
(German service)
Fee: 4-8 Rp/min, depending on
Service time: Monday to Friday
9:00 AM to 6:00 PM.
GMT+1 or GMT+2
(Daylight Saving Time)
Switzerland
Tel: 444 19 25
Turkish Service
Service time: 9:00 AM to 6:00 PM,
7 days a week
Turkey
Tel:
+39 02 66987799
Service time: 9:00 AM to 6:00 PM,
Monday to Friday
Italy
Tel: 1300 88 875465 (1300 88TPLINK)
Service time: 24 hrs ,
7 days a week
Malaysia
Tel: (+62 ) 021 6259 135
Service time:
Monday to Friday
9:00 -12:00 ; 13:00 -18:00
*Except public holidays
Indonesia
PPPoE
: If you choose PPPoE, enter the
User Name
and
Password
provided by your ISP. Then click
Next
.
Login
Connect to Internet
For
other
connection type, you can go to “
Network
following details.
What could I do if I forget the user name and
password of the Router?
Static IP
: If you choose Static IP, type in the IP address information
provided by your ISP. Then click
Next
.
Now you can see the following screen.
Click
Finish
to complete
the quick installation.
WAN
”.
Auto-Detect
:
If Auto-Detect is chosen, the Router will
detect the connection type provided by
your ISP automatically.