TP-Link TL-SC3230N TL-SC3230 V1 QIG 7106504101 - Page 1

Quick Installation Guide Megapixel Surveillance Camera Wireless N Megapixel Surveillance Camera MODEL NO. TL-SC3230/TL-SC3230N 2 Physical Description Antenna* Lens & Focus Ring Built-in Microphone Micro-SD Card Slot Power/Wireless LED LAN LED Power Jack LAN Port Audio Output Jack RESET Button LED Power/ Wireless LED LAN LED Status O Description The camera is powered o . Solid Orange The camera nishes boot-up and is ready to serve. Power on the camera, the LED will light up and then go o to booting process. After keeping o for several seconds, the LED will be solid orange. Flash Orange * The camera has been connected to a wireless network. Solid Green No cable is linked to the camera. Flash Green Data is being transmitted or received. Button RESET Button Description While the camera is ready, press RESET button for at least 5 seconds and release it. The camera will be restored to default settings and reboot again. * The Antenna and Flash Orange status are for TL-SC3230N only. 7106504101 Package Contents The product model shown in this QIG is TL-SC3230N, as an example. 1 Warning Before Installation Do not keep the Camera exposed to direct sunlight. It is recommended to mount the Camera where objects often pass, and the direction towards the door or passage is much better, see the illustration below: Power Adapter TL-SC3230N Mounting Bracket Megapixel Surveillance Camera Wireless N Megapixel Surveillance Camera TL-SC3230/TL-SC3230N QIG Ethernet Cable Resource CD (*The pictures are for reference only.) System Requirement The following operating systems are supported: Windows 2000 Windows Vista Windows 2003 Windows 7 Windows XP The following browsers are supported: Internet Explorer 8 or higher Safari Firefox Chrome (*Internet Explore Browser is recommended.) 3 Hardware Connection Do not place the Camera in high humidity environments such as in a kitchen. Do not place the Camera where there are high temperatures such as near an oven. Do not place the Camera near devices that emit radio waves, such as mobile phones. Connect the LAN port on Camera to the LAN Port of your router or switch with an Ethernet cable. Connect the power adapter cord to the Power jack. Plug the power adapter into the power outlet. Ethernet Cable WPS Ethernet Cable Note: Before proceeding, con rm that your PC is connected to your Router and can access the Internet. Make sure that your Router's DHCP feature is enabled. If not, please refer to your Router's instruction to enable it.