TP-Link TL-SL2452 TL-SL2452 V1 CLI Reference Guide 1910010971 - Page 108
loopback-detection recovery-time, loopback-detection(interface
View all TP-Link TL-SL2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Example Specify the interval-time as 50 seconds: TL-SL2428(config)# loopback-detection interval 50 loopback-detection recovery-time Description The loopback-detection recovery-time command is used to configure the time after which the blocked port would automatically recover to normal status. Syntax loopback-detection recovery-time recovery-time Parameter recovery-time -- The time after which the blocked port would automatically recover to normal status, and the loopback detection would restart. It is integral times of detection interval, ranging from 1 to 100 and the default value is 3. Command Mode Global Configuration Mode Example Configure the recovery-time as 5 times of detection interval: TL-SL2428(config)# loopback-detection recovery-time 5 loopback-detection(interface) Description The loopback-detection command is used to enable the loopback detection function of the specified port. To disable it, please use no loopback-detection command. Syntax loopback-detection no loopback-detection Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Enable the loopback detection function of ports 1-3: 98