TP-Link TL-SL2452 TL-SL2452 V1 CLI Reference Guide 1910010971 - Page 109
loopback-detection config, TL-SL2428Config-if-range
View all TP-Link TL-SL2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
TL-SL2428(config)# interface range fastEthernet 1/0/1-3 TL-SL2428(Config-if-range)# loopback-detection loopback-detection config Description The loopback-detection config command is used to configure the process-mode and recovery-mode for the ports by which the switch copes with the detected loops. Syntax loopback-detection config [ process-mode { alert | port-based }] [ recovery-mode { auto | manual }] Parameter process-mode -- The mode how the switch processes the detected loops. Alert: When a loop is detected, display an alert. Port based: When a loop is detected, display an alert and block the port. recovery-mode -- The mode how the blocked port recovers to normal status. Auto: Block status can be automatically removed after recovery time. Manual: Block status can only be removed manually. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Configure the loopback detection process-mode as port-based and recovery-mode as manual for port 2: TL-SL2428(config)# interface fastEthernet 1/0/2 TL-SL2428(config-if)# loopback-detection config process-mode port-based recovery-mode manual loopback-detection recover Description The loopback-detection recover command is used to remove the block status of selected ports, recovering the blocked ports to normal status, 99