TP-Link TL-SL3428 User Guide - Page 296
switchport general allowed vlan, tagged, remove
UPC - 845973020491
View all TP-Link TL-SL3428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 296 highlights
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide switchport general allowed vlan The switchport general allowed vlan Interface Configuration mode command adds or removes VLANs from a general port. Syntax switchport general allowed vlan add vlan-list [tagged | untagged] switchport general allowed vlan remove vlan-list Parameters • add vlan-list - Specifies the list of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. • remove vlan-list - Specifies the list of VLAN IDs to be removed. Separate nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. • tagged - Indicates that the port transmits tagged packets for the VLANs. • untagged - Indicates that the port transmits untagged packets for the VLANs. Default Configuration If the port is added to a VLAN without specifying tagged or untagged, the default setting is tagged. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines This command enables changing the egress rule (e.g., from tagged to untagged) without first removing the VLAN from the list. Example The following example adds VLANs 2, 5, and 6 to the allowed list of Ethernet port 6 . Console(config)# interface ethernet e6 Console(config-if)# switchport general allowed vlan add 2,5-6 tagged Page 295