TP-Link TL-SL3428 User Guide - Page 34
bridge multicast forward-all, remove, ethernet, port-channel
UPC - 845973020491
View all TP-Link TL-SL3428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide bridge multicast forward-all The bridge multicast forward-all Interface Configuration (VLAN) mode command enables forwarding all multicast packets on a port. To restore the default configuration, use the no form of this command. Syntax bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel port-channel-number-list} no bridge multicast forward-all Parameters • add - Force forwarding all multicast packets. • remove - Do not force forwarding all multicast packets. • interface-list - Separate nonconsecutive Ethernet ports with a comma and no spaces; a hyphen is used to designate a range of ports. • port-channel-number-list - Separate nonconsecutive port-channels with a comma and no spaces; a hyphen is used to designate a range of port-channels. Default Configuration This setting is disabled. Command Mode Interface Configuration (VLAN) mode User Guidelines There are no user guidelines for this command. Example In this example, all multicast packets on port 8 are forwarded. Console(config)# interface vlan 2 Console(config-if)# bridge multicast forward-all add ethernet e8 Page 33