TP-Link TL-WA854RE TL-WA854RE V1 User Guide 1910010961 - Page 18
Main Router/AP WiFi Network Name SSID - firmware
View all TP-Link TL-WA854RE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Firmware Version - This field displays the current firmware version of the Range Extender. Hardware Version - This field displays the current hardware version of the Range Extender. Connection Status to Existing Network - This part shows you the current information of the root wireless network which the device is connecting to. Main Router/AP WiFi Network Name (SSID) - It shows the name of the wireless network which your device is connecting to. Signal - It shows the root wireless network's signal strength that the device has received. Connection Status - It shows whether your device has been connected to a wireless network currently. "Connected" means the range extender have connected to a wireless network, while if it shows "disconnected", you can click "connect" to connect. Network- The following is the information of Wired LAN. You can configure them in the Network page. Range Extender MAC Address - The physical address of the system, as seen from the Network -> LAN page. Range Extender IP Address - The IP address of the wired LAN. Subnet Mask - The subnet mask associated with IP address. Wireless - These are the current wireless settings or information of the device. You can configure them in the Wireless -> Wireless Settings page. Operation Mode - Indicates the mode which the device is working on. "Disable" means the wireless radio has been turned off.You can configure it in the Wireless -> Wireless Settings page. Range Extender WiFi Network Name (SSID) - The Device's wireless network name (also called SSID) which your PC or other device can be connected to. Channel - The current wireless channel in use. Mode - The current wireless mode which the AP works on. Channel Width - The bandwidth of the wireless channel. Wireless Rate - It shows the current wireless rate between the range extender and your PC or other devices which are connected to the it. Traffic Statistics - The system traffic statistics. Sent (Bytes) - Traffic that counted in bytes has been sent out from wireless. Sent (Packets) - Traffic that counted in packets has been sent out from wireless. Received (Bytes) - Traffic that counted in bytes has been received from wireless. Received (Packets) - Traffic that counted in packets has been received from wireless. System Up Time - The length of the time since the device was last powered on or reset. Click the Refresh button to get the latest status and settings of the device. 11