TP-Link TL-WR743ND User Guide - Page 22
TL-WR743ND, Wireless, Finish, Reboot, Quick Setup, AP Router, Choose Operation mode
UPC - 845973051556
View all TP-Link TL-WR743ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
TL-WR743ND 150Mbps Wireless AP/Client Router ) Note: If you know the SSID of the desired AP, you can also input it into the field "SSID" manually. 4. Click the Next button in Figure 3-12. You will then see the Finish page. Because there are something changed on the Wireless page, you will see the Finish page as shown in Figure 3-13. Click the Reboot button to make your wireless configuration to take effect and finish the Quick Setup. Figure 3-13 Finish B. When you choose AP Router on Choose Operation mode page in Figure 3-6 , take the following steps: 1. Click Next, and then WAN Connection Type page will appear, shown in Figure 3-14. Figure 3-14 WAN Connection Type The Router provides Auto-Detect function and supports three popular ways PPPoE, Dynamic IP and Static IP to connect to the Internet. It's recommended that you make use of the Auto-Detect function. If you are sure of what kind of connection type your ISP provides, you can select the very type and click Next to go on configuring. 2. If you select Auto-Detect, the Router will automatically detect the connection type your ISP provides. Make sure the cable is securely plugged into the WAN port before detection. The appropriate configuration page will be displayed when an active Internet service is successfully detected by the Router. - 15 -