TP-Link USB2 User Manual - Page 49
Misc, 4.4.1 Factory Default
View all TP-Link USB2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
TL-PS110U Single USB2.0 Port Fast Ethernet Print Server Figure 4-8 ¾ Use DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server. ¾ IP Address: This option allows you to input IP address from the print server. The IP address must meet the IP addressing requirements of the network segment. )Note: On the TCP/IP Setup screen, specify a fixed IP address is highly recommended. ¾ Subnet Mask: This option allows you to input subnet mask from the print server. The IP address must meet the IP addressing requirements of the network segment. ¾ Default Router: This option allows you to input gateway from the print server. This IP address of gateway must meet the router or gateway to go across of the network segment. 4.4 Misc 4.4.1 Factory Default Click OK to restore the print server to its Factory Default settings. 44