TP-Link USB2 User Manual - Page 56
Appendix C: Frequently Asked Questions, TL-PS110U, Question A, Possible explanations, Solutions
View all TP-Link USB2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
TL-PS110U Single USB2.0 Port Fast Ethernet Print Server Appendix C: Frequently Asked Questions 1) Question A: Print jobs are sent to the print queue successfully, but fail to be sent to the printer. Possible explanations: 1. The Print server Name/Print Queue configuration is incorrect. 2. The Print server name specified and stored in the print server memory doesn't match the same one. 3. The power adapter connected to the print server is loose or disconnected. 4. The printer is off-line, jammed or out of paper. Solutions: 1. Check all the information in print port setting. 2. Check all the information of the print server by running PSAdmin. 3. Check to see that if the power adapters are properly connected. 4. Recheck the print server connection by running the PSAdmin. 2) Question B Print jobs start printing, but print very slowly or print unknown characters. Possible explanation and solution: A printer driver is missing or is incompatible with that printer. Using a print driver that is not specific for the printer can cause printing errors. Install the proper printer driver. If these printer drivers are not available to you, please contact your printer manufacturer. 3) Question C The upgrading process indication bar stops and does not seem to proceed again while upgrading the print server. Possible Explanation: There might be a network problem. This causes the upgrading procedure to fail. Solutions: 51