TRENDnet TDM-E400 User's Guide - Page 30
To ADSL, Ethernet router, To PC, your computer. Proceed to USB Driver Installation Part 2
View all TRENDnet TDM-E400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
TDM-E400 / TDM-C400 ADSL2+ Modem Router User's Manual Figure 5. USB Setup Wizard-Prompt for Hardware Plug In 6. Connect the USB cable to the ADSL2+ Ethernet Modem Router and to your computer. The provided USB cable provided has a flat connector on one end (called Type A) and a square connector on the other (Type B). Connect the flat connector to your PC and the square connector to the Ethernet Modem Router . See Figure 6. To ADSLEthernet router Figure 6. USB Cable Connectors To PC If a Microsoft digital signature dialog box again displays, click to continue. A window displays briefly, indicating that the system has found new hardware, and the Finished page displays to complete the installation: Figure 7. DSL Modem Setup Wizard-Finished Page 7. Click . You are now finished installing the driver. You do not need to restart your computer. Proceed to USB Driver Installation Part 2 to configure IP properties on the USB PC. 30