TRENDnet TE100-PC16R Manual - Page 10
PCMCIA Fast Ethernet Xpress Port - driver windows 2000
View all TRENDnet TE100-PC16R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8. When the Network window reappears, click on the Bindings tab. Choose your bindings. Click on the Protocols tab and select your settings. Do the same for the Services tab. 9. After your bindings, settings, and services are set, click on the Close button. Choose to restart your computer. After Windows NT restarts, be sure to log in. Installation for Windows NT 3.51 1. Open the Control Panel, and choose Network Setup. 2. Click the Add Adapter button. 3. Select " Requires disk from manufacturer". 4. Insert Driver Diskette in Drive A: and type A:\ in the path. 5. Select "PCMCIA Fast Ethernet Xpress Port PC Card" from the list. 6. Set the IRQ level, I/O Port and Memory Base Address to the desired settings from the lists of free resources available. And click OK. 7. Click OK to exit Network Setup. 8. Insert the PCMCIA Fast Ethernet Xpress Port PC Card. Reboot Windows NT. Installation for Windows 2000 1. Insert the PC Card into the slot. In New Hardware Found dialog box, select Driver from disk provided by hardware manufacturer. - 8 -