TRENDnet TE100-PC16R Manual - Page 17

Novell Netware Server, Netware 3.x or 4.x workstation, Network Operating System, Driver Install,

Get TRENDnet TE100-PC16R PDF manuals and user guides View all TRENDnet TE100-PC16R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

12. Move cursor to focus on the setting you want to make change and press Enter to select a fit value. When the configuration is accepted, press Enter on the OK field to exit the screen. Back to step 11. 13. Select "Novell Netware Server" as the network server you will attach to and press Enter key. 14. Installation program starts copying related files from diskette to the destination directory and modifies AUTOEXEC.BAT and NET.CFG under user's agreement. 15. Installation is complete. Please reboot the computer to have the driver take effect. Installation for Netware DOS ODI Driver Automatic Installation 1. Run INSTALL.EXE from driver diskette's root directory. 2. Select "Netware 3.x or 4.x workstation" in "Network Operating System" screen and enter "Driver Install" screen. 3. If current settings are acceptable, select "Start Installation" and go to step 5. Otherwise, select "Modify Parameters" to make settings changed. 4. Move cursor to focus on the setting you want to make change and press Enter to select a fit value. When the configuration is acceptable, press Enter on the OK field to exit the screen. Back to step 3. 5. Installation program starts copying related files - 15 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
- 15 -
12.
Move cursor to focus on the setting you want
to make change and press Enter to select a fit
value. When the configuration is accepted,
press Enter on the OK field to exit the screen.
Back to step 11.
13. Select "
Novell Netware Server
" as the network
server you will attach to and press Enter key.
14. Installation program starts copying related files
from diskette to the destination directory and
modifies AUTOEXEC.BAT and NET.CFG under
user's agreement.
15. Installation is complete.
Please reboot the
computer to have the driver take effect.
Installation for Netware DOS ODI Driver
Automatic Installation
1.
Run
INSTALL.EXE
from driver diskette's root
directory.
2.
Select "
Netware 3.x or 4.x workstation
" in
"
Network Operating System
" screen and enter
"
Driver Install
" screen.
3.
If current settings are acceptable, select "
Start
Installation
" and go to step 5. Otherwise, select
"
Modify Parameters
" to make settings changed.
4.
Move cursor to focus on the setting you want
to make change and press Enter to select a fit
value.
When the configuration is acceptable,
press Enter on the OK field to exit the screen.
Back to step 3.
5.
Installation program starts copying related files