TRENDnet TE100-S4PCI Manual - Page 11
Installation
View all TRENDnet TE100-S4PCI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation Installation of the 4-Port 10/100Mbps Ethernet Switch Card requires hardware installation first, then software installation. Unpack and Inspect Open the shipping cartons and carefully remove all items. In addition to this User's Guide, ascertain that you have: • One 4-Port 10/100Mbps NWay Ethernet Switch Card • Software Diskette • User's Manual Install the Adapter 1. Shut down the computer, unplug its power cord, and remove the chassis cover. 2. If your order does not include the Boot ROM option, go ahead to Step 3. If your order includes the Boot ROM option, then install the Boot ROM Chip by plugging the chip into the Boot ROM Socket on the 4-Port 10/100Mbps NWay Ethernet Switch Card. The notched end of the Boot ROM Chip must be aligned with the notched end of the Boot ROM Socket (opposite alignment will cause destruction of the Boot ROM Chip). 7