TRENDnet TEG-S224S User Guide - Page 113
Update Firmware and Configuration Files screen
View all TRENDnet TEG-S224S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Stackable NWay Ethernet Switch User's Guide Figure 6-36. Update Firmware and Configuration Files screen After making your changes in the fields above, press REBOOT TO START UPDATE to initiate the update sequence. The fields you can set are: ? ? Software Update Mode Set to either network or SLIP. Determines whether the configuration file should be obtained through the Ethernet network or through the console port. ? ? TFTP Server Address The IP address of the TFTP server where the runtime (switching software) or configuration file is located. This entry is used only if the Firmware Update is set to Enabled. ? ? Firmware Update Determines whether or not the Switch will try to look for a runtime image file on the TFTP server. ? ? File Name The complete path and filename of the runtime image file on your TFTP server to be uploaded to the Switch. ? ? Use Config File Toggle to Enabled to use the settings in a configuration text file when the switch is reset (rebooted). The Using the Console Interface 99