TRENDnet TEG-S224S User Guide - Page 184
Firmware and Configuration Update
View all TRENDnet TEG-S224S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Stackable NWay Ethernet Switch User's Guide Firmware and Configuration Update Figure 7-41. Firmware and Configuration Update window To update firmware or change a configuration file, fill in the requested information above and then click the Apply button. The information is described as follows: Software Update Mode & TFTP Server Address: ? ? Software Update Mode Set to either Network or SLIP. Determines whether the new firmware code should be obtained through the Ethernet network or through the console port. ? ? TFTP Server Address The IP address of the TFTP server where the new firmware code is. ? ? Last TFTP Server Address This read-only field displays the IP address of the last TFTP server accessed. 170 Web-Based Network Management
Stackable NWay Ethernet Switch User’s Guide
170
Web-Based Network Management
Firmware and Configuration Update
Figure 7-41.
Firmware and Configuration Update window
To update firmware or change a configuration file, fill in the
requested information above and then click the
Apply
button.
The information is described as follows:
Software Update Mode & TFTP Server Address:
??
Software Update Mode
Set to either
Network
or
SLIP
.
Determines whether the new firmware code should be
obtained through the Ethernet network or through the
console port.
??
TFTP Server Address
The IP address of the TFTP server
where the new firmware code is.
??
Last TFTP Server Address
This read-only field displays
the IP address of the last TFTP server accessed.