TRENDnet TEW-411BRPplus User's Guide - Page 24

RTS Threshold, Fragmentation Threshold, AP Mode or Wireless Bridge Mode, Wireless Bridge, Apply

Get TRENDnet TEW-411BRPplus PDF manuals and user guides View all TRENDnet TEW-411BRPplus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

RTS Threshold: This value should remain at its default setting of 2346. Should you encounter inconsistent data flow, only minor modifications are recommended. If a network packet is smaller than the preset RTS threshold size, the RTS/CTS mechanism will not be enabled. The Router sends Request to Send (RTS) frames to a particular receiving station and negotiates the sending of a data frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the right to begin transmission. Fragmentation Threshold: This value specifies the maximum size for a packet before data is fragmented into multiple packets. It should remain at its default setting of 2346. If you experience a high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low may result in poor network performance. Only minor modifications of this value are recommended. AP Mode or Wireless Bridge Mode: 802.11g AP Router can operate in two modes. When the AP Mode is selected, the device operates as a normal Access Point. It provides every wireless client station a join network point. The Wireless Bridge Mode will be able to join different AP Routers wirelessly by inputting the destination MAC Address. * Click Apply to save your settings. User's Guide 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
User’s Guide
23
RTS Threshold:
This value should remain at its default setting of 2346. Should you encounter
inconsistent data flow, only minor modifications are recommended. If a network packet is smaller than
the preset RTS threshold size, the RTS/CTS mechanism will not be enabled. The Router sends
Request to Send (RTS) frames to a particular receiving station and negotiates the sending of a data
frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to
acknowledge the right to begin transmission.
Fragmentation Threshold:
This value specifies the maximum size for a packet before data is
fragmented into multiple packets. It should remain at its default setting of 2346. If you experience a
high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the
Fragmentation Threshold too low may result in poor network performance. Only minor modifications of
this value are recommended.
AP Mode or Wireless Bridge Mode
: 802.11g AP Router can operate in two modes. When the
AP
Mode
is selected, the device operates as a normal Access Point.
It provides every wireless client
station a join network point.
The
Wireless Bridge
Mode
will be able to join different AP Routers
wirelessly by inputting
the
destination MAC Address.
* Click
Apply
to save your settings.