TRENDnet TEW-716BRG User's Guide - Page 12
Connect wireless devices to your router, Connect wireless devices using WPS, Passphrase
View all TRENDnet TEW-716BRG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
TRENDnet User's Guide Create your Wireless security Passphrase (password or key): • Passphrase - Enter the passphrase. This is the password or key that is used to connect your computer to this router wirelessly • Confirmed Passphrase - Re-enter the passphrase. Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.) Connect wireless devices to your router A variety of wireless network devices can connect to your wireless network such as: • Smart Phones • Wireless Laptop computers Each device may have its own software utility for searching and connecting to available wireless networks, therefore, you must refer to the User's Manual/Guide of your wireless client device to determine how to search and connect to this router's wireless network. TEW-716BRG Connect wireless devices using WPS WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless devices support WPS, you can use this feature to easily add wireless devices to your network. Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled. There are two methods the WPS feature can easily connect your wireless devices to your network. • Push Button Configuration (PBC) method o RECOMMENDED Hardware Push Button method-with an external button located physically on your router and on your client device o WPS Software/Virtual Push Button - located in router management page • PIN (Personal Identification Number) Method - located in router management page Note: Refer to your wireless device documentation for details on the operation of WPS. Recommended Hardware Push Button (PBC) Method • Note it is recommended that a wireless key (passphrase or password) is created before connecting clients using the PBC method. If no wireless key is defined when connecting via PBC, the router will automatically create an encryption key that is 64 characters long. This 64 character key will then have to be used if one has to connect computers to the router using the traditional connection method. To add a wireless device to your network, simply push the WPS button on the wireless device you are connecting(consult client device User's Guide for length of time), then push and hold the WPS button located on your router for 3 seconds and release it. A blue LED on your router WPS button will flash indicating that the WPS setup process has been activated on your router. (See "Product Hardware Features" on page 4) For connecting additional WPS supported devices, repeat this process for each additional device. © Copyright 2012 TRENDnet. All Rights Reserved. 11