TRENDnet TEW-716BRG User's Guide - Page 13
Basic wireless settings, PBC Software/Virtual Push Button
View all TRENDnet TEW-716BRG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
TRENDnet User's Guide PBC (Software/Virtual Push Button) Basic Settings > Wireless >WPS Setup In addition to the hardware push button located physically on your router, the router management page also has push button which is a software or virtual push button you can click to activate WPS on your router. 1. Log into your router management page (see "Access your router management page" on page 18). 2. Click on Basic Settings, Wireless, and click on WPS Setup in the bottom. 3. To add a wireless device to your network, simply the push the WPS button on the wireless device (consult wireless device's User's Guide for length of time), you are connecting, then in your router management page next to Config Method, select Push Button, click Trigger to start WPS authentication. PIN (Personal Identification Number) Wireless >WiFi Protected Setup If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless device product label or located in the wireless device wireless software utility), you can use this method. 1. Log into your router management page (see "Access your router management page" on page 18). 2. Click on Basic Settings, Wireless, and click on WPS Setup in the bottom. © Copyright 2012 TRENDnet. All Rights Reserved. TEW-716BRG 3. Next to Config Method select PIN Code, enter the WPS PIN of the wireless device you are connecting and click Trigger. Note: You may need to initiate the WPS PIN on your wireless device first when using this method. Refer to your wireless device documentation for details on the operation of WPS. Basic wireless settings Basic Setting > Wireless This section outlines available management options under the Basic Wireless sub tab. 1. Log into your router management page (see "Access your router management page" on page 18). 2. Click on Basic Settings and click on Wireless. 3. To save changes to this section, click Apply when finished. 12