TRENDnet TEW-726EC Quick Installation Guide - Page 4

TRENDnet User's Guide Product Hardware Features Detachable antennas Low Profile Bracket Standard Bracket TEW-726EC Installing the low profile bracket Using a Philips screwdriver (not included), remove the 2 screws in the PCIe card holding the bracket in place by turning the screws counter clockwise and remove the standard size bracket. Once the standard size bracket is removed, attach the low profile bracket. Using a Philips screwdriver, secure the bracket to the card by driving the 2 screws into the slots where they were removed before by turning them clockwise until tightened. Once the bracket is secured, the antennas can be reattached. Activity LED PCI Express x1 Interface • Detachable antennas - The external 2dBi antennas can be attached/detached to the reverse SMA connectors located on the PCIe adapter. • Activity LED Indicator -This LED turns solid when a wireless connection is established and blinks during wireless data transmission. The LED will blink every 10 sec. when disconnected. If WPS (Wi-Fi Protected Setup) is activated using the included utility, the LED will blink rapidly. • Low Profile Bracket - In addition to the standard PCI bracket, a low profile PCI bracket is included to allow installation of this adapter into computer cases that only accept the size of low profile PCI cards instead the standard larger PCI size. System Requirements • Windows 8 (32/64-bit), Windows 7 (32/64-bit), Vista (32-bit), or XP (32/64-bit) • Available PCIe (PCI Express x1) slot • CD-ROM Drive (Driver & Utility Installation with included CD) © Copyright 2013 TRENDnet. All Rights Reserved. Application Diagram Each desktop computer has the wireless dual band PCIe adapter installed. One desktop computer wirelessly connected to the dual band router using the common 2.4GHz band and another computer wirelessly connected to the dual band router using the lesscongested 5GHz band. 2