TRENDnet TEW-738APBO Quick Installation Guide - Page 5

Enter, User name, Password, admin, P+DATA OUT, 100 DATA

Get TRENDnet TEW-738APBO PDF manuals and user guides View all TRENDnet TEW-738APBO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

1. Connect one end of a network cable into TEW-738APBO #1. 2. Connect the opposite end of the network cable to the P+DATA OUT port on the Power over Ethernet Injector. 3. Connect one end of another network cable to the 10/100 DATA IN port on the Power over Ethernet Injector. 4. Connect the other end of a network cable to your computer's Ethernet port. 5. Connect the power adapter into the Power over Ethernet Injector. Then connect the power adapter into a power outlet. (EU models have an on/off switch. Please move the power switch to the "On" position.). 6. Assign a Static IP address to your computer's network adapter in the subnet of 192.168.10.x (e.g. 192.168.10.25) and a subnet mask of 255.255.255.0. 7. Open your web browser, type the IP address of the access point in the address bar, and then  press Enter. The default IP address is 192.168.10.100 8. Enter the User name and Password, and then click OK. By default: User Name: admin Password: admin Note: Username and password are case sensitive. Note: For first time installation, you are required to change the admin password. 9. Enter a new admin password. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
4
5.
Connect the power adapter into the Power
over Ethernet Injector. Then connect the
power
adapter into a power outlet. (EU
models have an on/off switch. Please
move the power switch to
the “On”
position.).
6.
Assign a Static IP address to your
computer's network adapter in the subnet
of 192.168.10.x
(e.g. 192.168.10.25) and a
subnet mask of 255.255.255.0.
7.
Open your web browser, type the IP
address of the access point in the address
bar, and then
±
press
Enter
. The default IP
address is 192.168.10.100
8.
Enter the
User name
and
Password
, and
then click
OK
. By default:
User Name:
admin
Password:
admin
Note:
Username and password are case
sensitive.
Note:
For first time installation, you are required to change the admin password.
9.
Enter a new admin password.
1.
Connect one end of a network cable into TEW-738APBO #1.
2.
Connect the opposite end of the network cable to the
P+DATA OUT
port on the Power over
Ethernet Injector.
3.
Connect one end of another network cable to the
10/100 DATA IN
port on the Power over
Ethernet Injector.
4.
Connect the other end of a network cable to your computer's Ethernet port.