TRENDnet TEW-738APBO Quick Installation Guide - Page 8
Hardware Installation
 |
View all TRENDnet TEW-738APBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Hardware Installation Waterproof kit installation 1. Unscrew the sealing nut from the main body. 2. Separate the rubber seal from the claw. 3. Verify that you have the following parts: 7. Insert the seal/rubber claw into the Cable Gland. Cable Gland Seal Claw Sealing Nut 4. Insert one end of an Ethernet cable into the sealing nut. 8. Connect the Ethernet cable to the PoE port on the rear of the TEW-738APBO. 5. Insert the Ethernet cable into the seal. 9. Using your hand, screw the main body counter clockwise to secure it to the TEW-738APBO. 6. Insert the seal into the claw. 10. Using your hand, screw the seal nut counter clockwise to secure it to the main body. 7
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
 |
 |
7
3. Hardware Installation
Waterproof kit installation
1.
Unscrew the sealing nut from the main
body.
2.
Separate the rubber seal from the claw.
Cable Gland
Seal
Claw
Sealing Nut
3.
Verify that you have the following parts:
4.
Insert one end of an Ethernet cable into
the sealing nut.
5.
Insert the Ethernet cable into the seal.
6.
Insert the seal into the claw.
7.
Insert the seal/rubber claw into the Cable
Gland.
8.
Connect the Ethernet cable to the PoE port
on the rear of the TEW-738APBO.
9.
Using your hand, screw the main body
counter clockwise to secure it to the
TEW-738APBO.
10.
Using your hand, screw the seal nut
counter clockwise to secure it to the main
body.