TRENDnet TEW-738APBO User's Guide - Page 65
Routing, Status, System Overview, Distribute RIP over OSPF
View all TRENDnet TEW-738APBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
TRENDnet User's Guide Routing This section allows you to configure the routing of the access point. • OSPF: Select Enable to enable OSPF setting TEW-738APBO System Overview Display detailed information of System, Network, LAN and Wireless in the System Overview page. • Device Information: Display the information of the system. • RouterID: Select the ID to configure • Network (WAN): Select to configure the WAN section, enter the area to assign • Network (LAN): Select to configure the LAN section, enter the area to assign. • Distribute RIP over OSPF: Check this option to use RIP protocol • RIP Settings • RIP Service: Select Enable to use RIP protocol • Side: Select the network section to apply RIP. Status This section breaks down into subsections of System Overview, Associated Clients Status, WDS Link Status, Extra Information and Event Log. © Copyright 2014TRENDnet. All Rights Reserved. o Operating Mode: The mode currently in service. o Host Name: The name of the system. o Host Description: A description of the system. o Firmware Version: The current installed firmware version. o Firmware Date: The build time of installed firmware. o Device Time: The current time of the system. o System Up Time: The time period that system has been in service since last reboot. o ETH1/ETH2MAC: Ethernet MAC address of the access point. o Wireless MAC: Wireless MAC address of the access point o CPU Loading: The CPU loading of the access point o Memory Used: Memory usage of the access point. 65