TRENDnet TEW-738APBO User's Guide - Page 7
Product Benefit, Installation Considerations, Installation, P+DATA Out - range
View all TRENDnet TEW-738APBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
TRENDnet User's Guide Product Benefit The 10 dBi Outdoor PoE Access Point is the point of connection to Wireless Outdoor Network for service provider deploying last mile services to business or residential broadband subscribers.. Network administrators can create multiple subscriber service tier using per-subscriber rate limiting features, and manage centrally. Installation Considerations There are a number of factors that can impact the range of wireless devices. 1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at an angle. The more material the signal has to pass through the more signal you will lose. 2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. 3. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall. Dense materials like metal, solid wood, glass or even furniture may block or degrade the signal. 4. Antenna orientation can also have a large impact on your wireless signal. Use the wireless adapter's site survey tool to determine the best antenna orientation for your wireless devices. 5. Interference from devices that produce RF (radio frequency) noise can also impact your signal. Position your wireless devices away from anything that generates RF noise, such as microwaves, radios and baby monitors. If you are still experiencing low or no signal consider repositioning the wireless devices or installing additional access points. The use of higher gain antennas may also provide the necessary coverage depending on the environment. TEW-738APBO Installation 1. Unscrew the black cap covering the PoE port of the TEW-738APBO 2. Install the waterproof kit and insert one end of an Ethernet cable through the kit. 3. Connect the Ethernet cable to the PoE port of the TEW-738APBO 4. Tighten and secure the seal nut of the waterproof kit. 5. Connect the other end of the Ethernet cable to the P+DATA Out port on the PoE injector. © Copyright 2014TRENDnet. All Rights Reserved. 7