TRENDnet TEW-820AP User's Guide

TRENDnet TEW-820AP Manual

Get TRENDnet TEW-820AP PDF manuals and user guides View all TRENDnet TEW-820AP manuals
Add to My Manuals
Save this manual to your list of manuals

TRENDnet TEW-820AP manual content summary:

  • TRENDnet TEW-820AP | User's Guide - Page 1
    TRENDnet User's Guide Cover Page
  • TRENDnet TEW-820AP | User's Guide - Page 2
    Mode with Wireless Bridge (WDS 19 Planning for Wireless Bridging (WDS 21 Creating a Wireless Bridge (WDS 23 Bridging additional WDS supported devices 27 Client...28 Set the device to client bridge mode 29 Configure Client mode 29 © Copyright 2014 TRENDnet. All Rights Reserved. TEW-820AP Link
  • TRENDnet TEW-820AP | User's Guide - Page 3
    , online retailer, or reseller/distributor from which the product was purchased. TEW-820AP Features TRENDnet's Wireless AC Easy-Upgrader, Model TEW-820AP, adds a Wireless AC network to a wireless or wired router. Simply plug the TEW820AP into ann available Ethernet port on the back of your existing
  • TRENDnet TEW-820AP | User's Guide - Page 4
    TRENDnet User's Guide Product Hardware Features Rear View Front View TEW-820AP 10/100 Mbps Ethernet/ LAN Port remain solid green automatically once WPS process is completed. Side View © Copyright 2014 TRENDnet. All Rights Reserved. Power Port • Power Port: Connect the included power adapter
  • TRENDnet TEW-820AP | User's Guide - Page 5
    supplied by your ISP "Internet Service Provider") and physically connected using one of your access point's Ethernet LAN port. The access point is configured to create a 5GHz wireless network your wireless devices (TVs, game consoles, or media bridges) TEW-820AP Expanding a Home Network What is
  • TRENDnet TEW-820AP | User's Guide - Page 6
    TRENDnet User's Guide Basic Installation 1. Insert Setup Wizard CD into your CD-ROM drive. 2. The welcome screen will automatically appear on your monitor. Click Setup Wizard. TEW-820AP 3. Connect a network cable from the LAN port of your router to the LAN port of the access point, press Next to
  • TRENDnet TEW-820AP | User's Guide - Page 7
    TRENDnet User's Guide TEW-820AP 8. Select the mode you would like to configure the TEW-820AP. For this example we will configure the TEW-820AP in Access Point mode. Select Access Point and click Configure. 10. Select Manual Setup to manually configure the TEW-820AP wireless settings. 9. Select
  • TRENDnet TEW-820AP | User's Guide - Page 8
    TRENDnet User's Guide TEW-820AP 12. Select the wireless security or encryption type to assign your TEW-820AP and lick Next. For the highest level of wireless security or encryption select WPA-PSK. 14. Confirm your settings and click Next to continue. To save your settings click Save to save your
  • TRENDnet TEW-820AP | User's Guide - Page 9
    TRENDnet User's Guide 15. You have completed configuring your TEW-820AP. Click Exit to close the utility. TEW-820AP Access your access point management page Note: Your access point management page URL/domain name http://tew-820AP or default IP address http://192.168.10.100 is accessed through the
  • TRENDnet TEW-820AP | User's Guide - Page 10
    clients (ex. laptops, game consoles, DVRs, Smart TVs, and mobile devices, etc.) to wirelessly connect to your access point to establish network and Internet connectivity. TEW-820AP Set the device to access point mode Main > Device Mode Note: By default, the device is set to function in access
  • TRENDnet TEW-820AP | User's Guide - Page 11
    802.11a wireless devices. o 802.11n only: Select this option if you only have 802.11n wireless devices. © Copyright 2014 TRENDnet. All Rights Reserved. TEW-820AP o Mixed strength and performance supported by the wireless computers and devices in your network. Please review the security types to
  • TRENDnet TEW-820AP | User's Guide - Page 12
    is significantly more robust than the WEP technology. Much of the older 802.11g hardware was been upgraded (with firmware/driver upgrades) to support this encryption standard. Total wireless speeds under this encryption type however are limited to 54Mbps. • WPA-Auto: This setting provides the access
  • TRENDnet TEW-820AP | User's Guide - Page 13
    TRENDnet User's Guide 1. Log into your access point management page (see "Access your access point management page" on page 8). 2. Click on Wireless, and click on Security. 3. Under Wireless Security, click on the Security Mode drop-down list to select your wireless security type. TEW-820AP
  • TRENDnet TEW-820AP | User's Guide - Page 14
    , you must refer to the User's Manual/Guide of your wireless client device to determine how to search and connect to this access point's wireless network. See the "Appendix" on page 44 for general information on connecting to a wireless network. © Copyright 2014 TRENDnet. All Rights Reserved. 13
  • TRENDnet TEW-820AP | User's Guide - Page 15
    TRENDnet User's Guide Connect wireless devices using WPS WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless devices support WPS, you can use this feature to easily add wireless devices to your network. Note: You will not be able
  • TRENDnet TEW-820AP | User's Guide - Page 16
    Connect. 5. Then press the PIN activation on your wireless device (consult wireless device's User's Guide for length of time) you are connecting. 6. Wait for your access point to finsh the WPS process. TEW-820AP Steps to improve wireless connectivity There are a number of factors that can impact
  • TRENDnet TEW-820AP | User's Guide - Page 17
    keep your primary wireless network security information private. TEW-820AP • Wireless Network Name: Enter the wireless name (SSID) for your wireless network. This acronym stands for Service Set Identifier and is the name of your wireless network. It differentiates your wireless network from others
  • TRENDnet TEW-820AP | User's Guide - Page 18
    TRENDnet User's Guide TEW-820AP Wireless Bridge Wireless bridging using WDS (Wireless Distribution System) allows the device to create a wireless bridge with other WDS supported wireless routers and access points configured in WDS mode to bridge groups of network devices together wirelessly.
  • TRENDnet TEW-820AP | User's Guide - Page 19
    TRENDnet User's Guide The diagram below illustrates an example of multiple WDS wireless bridge links. TEW-820AP © Copyright 2014 TRENDnet. All Rights Reserved. 18
  • TRENDnet TEW-820AP | User's Guide - Page 20
    TRENDnet User's Guide TEW-820AP Access Point Mode with Wireless Bridge (WDS) Wireless bridging using WDS (Wireless Distribution System) allows the device to create a wireless bridge with other WDS supported wireless routers and access points configured in WDS mode to bridge groups of network
  • TRENDnet TEW-820AP | User's Guide - Page 21
    TRENDnet User's Guide The diagram below illustrates an example of multiple WDS wireless bridge links with access point functionality. TEW-820AP © Copyright 2014 TRENDnet. All Rights Reserved. 20
  • TRENDnet TEW-820AP | User's Guide - Page 22
    TRENDnet User's Guide TEW-820AP Planning for Wireless Bridging (WDS) Note: By default, the device is : 1. Verify that all of your 5GHz wireless devices support WDS. 2. Make sure different IP addresses are assigned to each WDS supported wireless device used for bridging. (ex. 192.168.10.100,192.
  • TRENDnet TEW-820AP | User's Guide - Page 23
    TRENDnet User's Guide TEW-820AP The diagram below illustrates an example of the parameters configured when planning for WDS bridging. Each WDS supported access point is configured with a different IP address (blue) to prevent IP address conflict. The "wired router" is the only single DHCP server (
  • TRENDnet TEW-820AP | User's Guide - Page 24
    TRENDnet User's Guide TEW-820AP Creating a Wireless Bridge (WDS) Wireless > Basic Note: Since wireless bridge (WDS) is a subset of 5GHz Wireless MAC Address: 00:11:22:AA:BB:C2 AP2 (Access Point 2) 5GHz Wireless MAC Address: 00:11:22:AA:BB:C4 • Make sure the IP address on each WDS supported access
  • TRENDnet TEW-820AP | User's Guide - Page 25
    TRENDnet User's Guide AP1 Configuration TEW-820AP 1. Log into your access point management page (see "Access your access point management page" on page 7). 2. Click on Wireless, click on Basic. 3. Click the Mode drop-down list and select one of following WDS options. • WDS: Select this option to
  • TRENDnet TEW-820AP | User's Guide - Page 26
    TRENDnet User's Guide TEW-820AP • 802.11 n-mode: Select the 802.11 mode you would like to the wireless band to operate on. Note: This device operates in 5GHz wireless mode, below options of 802.11n is based on 5GHz 802.11. o 802.11a only: Select this option if you only have 802.11a wireless
  • TRENDnet TEW-820AP | User's Guide - Page 27
    TRENDnet User's Guide AP2 Configuration TEW-820AP 1. Log into your access point management page (see "Access your access point management page" on page 9). 2. Click on Wireless, click on Basic. 3. Click the Mode drop-down list and select one of following WDS options. • WDS: Select this option to
  • TRENDnet TEW-820AP | User's Guide - Page 28
    AP1 (hub). For multiple point-to-point wireless WDS bridge links, you can follow the entire configuration procedure in the previous section "Creating a Wireless Bridge" on page 23. The TEW-820AP can support up to 8 wireless WDS bridge connections. © Copyright 2014 TRENDnet. All Rights Reserved. 27
  • TRENDnet TEW-820AP | User's Guide - Page 29
    TRENDnet User's Guide TEW-820AP Client Client mode allows the device to act as a wireless client device to connect to your wireless network and bridge the wireless connection from the wireless network to the LAN port located on the back of the device. Client devices with wired network capability
  • TRENDnet TEW-820AP | User's Guide - Page 30
    TRENDnet User's Guide Set the device to client bridge mode Main > Device Mode 1. Log into your access point management page (see "Access your access point management page" on page 8). 2. Click the Main and Device Mode. Next to Operation Mode select Client on the drop- down list. TEW-820AP 4. At the
  • TRENDnet TEW-820AP | User's Guide - Page 31
    TRENDnet User's Guide TEW-820AP deny specific computers and other devices from using this access point's wireless network. You can enter up to 24 MAC address entries. page 8). 2. Click on Access, click on MAC Filters. 3. Review the MAC Filter options, click Save Settings to save settings. Click
  • TRENDnet TEW-820AP | User's Guide - Page 32
    TRENDnet User's Guide 1. Log into your access point management page (see "Access your access point management page" on page 8). 2. Click on Access, click on User Limit. 3. Review the User Limit options, click Save Settings to save settings. TEW-820AP allow on your wireless network. Change of Service
  • TRENDnet TEW-820AP | User's Guide - Page 33
    TRENDnet User's Guide TEW-820AP in DHCP server. • Static IP: Choose this option to manually configure the IP address settings of the access point. • tew-820AP Your access point can be used as a DHCP (Dynamic Host Configuration Protocol) server to automatically assign an IP address to each wireless
  • TRENDnet TEW-820AP | User's Guide - Page 34
    TRENDnet User's Guide server settings can be accessed when access point is set to Static IP address and it is disabled by default TEW-820AP 3. Review the Time settings. Click Apply to save settings. © Copyright 2014 TRENDnet. All . • Manually set time: Set your router date and time manually in the
  • TRENDnet TEW-820AP | User's Guide - Page 35
    . TEW-820AP Access Point Maintenance & Monitoring Reset your Access Point to factory defaults Tools > Settings Management You may want to reset your access point to factory defaults if you are encountering difficulties with your access point and have attempted all other troubleshooting. Before
  • TRENDnet TEW-820AP | User's Guide - Page 36
    TRENDnet User's Guide Access Point Default Settings Administrator User Name Administrator Password Access Point Default URL Access Point IP Address Access Point Subnet Mask Mode Wireless Wireless Network Name/Encryption Wireless Multiple SSID admin admin http://tew-820AP other troubleshooting.
  • TRENDnet TEW-820AP | User's Guide - Page 37
    to a power source or ensure that the battery is fully charged. TEW-820AP • Disable sleep mode on your computer as this may interrupt the firmware upgrade process. • Do not upgrade the firmware using a wireless connection, only using a wired network connection. • Any interruptions during the
  • TRENDnet TEW-820AP | User's Guide - Page 38
    TRENDnet User's Guide to refresh log entries 5. To save log entries click Save Log button. TEW-820AP Email logs Tools > Email settings Your access point can email you log . 4. Review the Email setting section and click Save Settings to Apply. © Copyright 2014 TRENDnet. All Rights Reserved. 37
  • TRENDnet TEW-820AP | User's Guide - Page 39
    TRENDnet User's Guide TEW-820AP • From Email Address: Enter the recipient email address to use • page 8). 2. Click on Status, and click on Wireless Client. © Copyright 2014 TRENDnet. All Rights Reserved. • Firmware Version: The current firmware version your access point is running. • System Up
  • TRENDnet TEW-820AP | User's Guide - Page 40
    TRENDnet User's Guide LAN : Displays the wireless security type applied to your wireless network. © Copyright 2014 TRENDnet. All Rights Reserved. TEW-820AP • Channel Width on the functionality of your access point or for troubleshooting purposes. 1. Log into your access point management page (
  • TRENDnet TEW-820AP | User's Guide - Page 41
    TRENDnet User's Guide 2. Click on Status, and click on Statistics. LAN Statistics Wireless Statistics © Copyright 2014 TRENDnet. All Rights Reserved. TEW-820AP 40
  • TRENDnet TEW-820AP | User's Guide - Page 42
    2014 TRENDnet. All Rights Reserved. Access • MAC Filter • Multi-SSID • User Limit • Management o Password Tools • Upload Firmware • Settings Management o Export settings o Restore settings o Load factory default o Reboot • Ping Test • Schedule • Email Settings • Syslog • Logout TEW-820AP 41
  • TRENDnet TEW-820AP | User's Guide - Page 43
    TRENDnet User's Guide support (Link local, Static, SLAAC/DHCPv6) • WLAN partition • WMM support • Easy CD installation Wizard SSID • Up to 4 additional SSIDs Access Control • Wireless © Copyright 2014 TRENDnet. All Rights Reserved. TEW-820AP Wireless Channels • FCC: : 100 - 240 V AC, 50 - 60 Hz
  • TRENDnet TEW-820AP | User's Guide - Page 44
    TRENDnet User's Guide Troubleshooting Q: I typed http://tew-820AP in my Internet wireless is enabled, login to the access point management page, click on Basic and Wireless. 5. Please see "Steps to improve wireless connectivity" on page 14 if you continue to have wireless connectivity problems
  • TRENDnet TEW-820AP | User's Guide - Page 45
    TRENDnet User's Guide the wired or wireless IP address settings. Note: en0 is typically the wired Ethernet and en1 is typically the wireless Airport interface. Graphical address settings displayed. © Copyright 2014 TRENDnet. All Rights Reserved. TEW-820AP Note: If you are experiencing difficulties
  • TRENDnet TEW-820AP | User's Guide - Page 46
    TRENDnet User's Guide e. Configure TCP/IP to use DHCP. In MAC 10.4, from the Configure b. Right-click the Local Area Connection icon and the click Properties. © Copyright 2014 TRENDnet. All Rights Reserved. TEW-820AP c. Click Internet Protocol (TCP/IP) and click Properties. d. Then click Use the
  • TRENDnet TEW-820AP | User's Guide - Page 47
    Networks, click the wireless network you would like to connect to. 3. You may be prompted to enter a security key in order to connect to the network. 4. Enter in the security key corresponding to the wireless network, and click Connect. © Copyright 2014 TRENDnet. All Rights Reserved. TEW-820AP 46
  • TRENDnet TEW-820AP | User's Guide - Page 48
    TRENDnet User's Guide accordance with the instructions, may cause firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. TEW-820AP wireless access to telecommunications and/or network services. This device may not be
  • TRENDnet TEW-820AP | User's Guide - Page 49
    TRENDnet User's Guide output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. Česky [Czech] TRENDnet tímto prohlašuje, že tento TEW-820AP je ve shodě se základními pož
  • TRENDnet TEW-820AP | User's Guide - Page 50
    TRENDnet User's Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-820AP - 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year
  • TRENDnet TEW-820AP | User's Guide - Page 51
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
TRENDnet User’s Guide
Cover Page