TRENDnet TEW-820AP User's Guide - Page 34

TRENDnet User's Guide server settings can be accessed when access point is set to Static IP address and it is disabled by default TEW-820AP • Enable DHCP Server: Select to enable DHCP server. • DHCP IP Address Range: Enter the range of IP addresses to assign through the access point's DHCP server • Always Broadcast: Select to enable the access point DHCP server. • Gateway: Assign a gateway IP address to use. • WINS: Assign a WINS IP addresss to use. • DNS: Assign DNS IP address to use • DHCP Lease Time: Select the DHCP lease time allowed. Set your date and time Main > Time 1. Log into your access point management page (see "Access your access point management page" on page 8). 2. Click on Main, and click on Time. 3. Review the Time settings. Click Apply to save settings. © Copyright 2014 TRENDnet. All Rights Reserved. • Time: Displays the current device time and date information. • Enable NTP Server: Select this option to set your router date and time to synchronize with an NTP (Network Time Protocol) server address (e.g. pool.ntp.org). Enter the NTP server address next to Default NTP server, (e.g. pool.ntp.org). Click the Time Zone drop-down list to select the appropriate zone and you can optionally change your NTP Sync period. • NTP Server: Enter the NTP server address you would like to use. Click Update Now to update time settings. • Time Zone: Select your time zone from the pull down menu. • Enable Daylight Saving: Check the option to configure the DST settings. Set the annual range when daylight saving is activated. Note: NTP servers are used for computers and other network devices to synchronize time across an entire network. • Manually set time: Set your router date and time manually in the Date and Time Settings section. Click Copy Your Computer's Time Settings if you would like to copy your computer's time settings. 33