TRENDnet TEW-820AP User's Guide - Page 14

TRENDnet User's Guide Selecting WPA Enterprise: The following section outlines options when selecting WPA (EAP or RADIUS). This security type is also known as EAP (Extensible Authentication Protocol) or Remote Authentication Dial-In User Service or RADIUS. Note: This security type requires an external RADIUS server, Pre-Shared Key only requires you to create a passphrase. • Security Mode: Select WPA-Enterprise • WPA Mode: Select WPA2 Only, WPA Only or Auto (WPA or WPA2). It is recommended to select WPA2 Only, but if you are not certain you can select Auto. • Cipher Type: Select AES when using WPA2 only, TKIP when using WPA Only. You can select TKIP and AES when using Auto (WPA or WPA2) • RADIUS Server IP Address: Enter the IP address of the RADIUS server. (e.g. 192.168.10.250) • RADIUS Port: Enter the port your RADIUS server is configured to use for RADIUS authentication. Note: It is recommended to use port 1812 which is typical default RADIUS port. TEW-820AP • RADIUS server Shared Secret: Enter the shared secret used to authorize your access point with your RADIUS server. Connect wireless devices to your access point A variety of wireless network devices can connect to your wireless network such as: Gaming Consoles • Internet enabled TVs • Network media players • Smart Phones • Wireless Laptop computers • Wireless IP cameras Each device may have its own software utility for searching and connecting to available wireless networks, therefore, you must refer to the User's Manual/Guide of your wireless client device to determine how to search and connect to this access point's wireless network. See the "Appendix" on page 44 for general information on connecting to a wireless network. © Copyright 2014 TRENDnet. All Rights Reserved. 13