TRENDnet TFC-1600MM Configuration Guide - Page 16
Power Fail Trap: to set the Power Fail Trap
UPC - 710931504026
View all TRENDnet TFC-1600MM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2-3 SNMP Configuration Figure (16) Get Community Name: to get the device community name (default=public). Set Community Name: to set the device community name (default=private). Trap Community Name: to authorize the device trap community name (default = public) . Trap Host IP Address: to set the trap host IP address (sameasmonitoringstation IP address). Cold Start trap: to set the trap for rebooting the device (default = enable). Authentication Fail Trap: to set the warning trap when the community name of the device and workstation are different (default = enable). Power Fail Trap: to set the Power Fail Trap (default = enable). Fan Fail Trap: to set the fan fail trap (default = enable). MC Plug-in Trap: to set the trap of the Media Converter module if it is plugged in (default = enable). MC Pullout Trap: to set the trap of the Media Converter module if it is pulled out (default = enable).