TRENDnet TFC-1600MM Configuration Guide - Page 6
Software Reboot, Factory Reset, Image Update, Configuration Update - firmware
 |
UPC - 710931504026
View all TRENDnet TFC-1600MM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Figure (2) Configuration 1-1-1 Software Reboot To reboot for the software setting. 1-1-2 Factory Reset This function is to set the device back to the default setting in case of the messy setting. 1-1-3 Image Update Figure (3) The section is to set the TFTP Server IP Address first, and the default address was set to "192.168.1.2". The Image File can be updated by uploading the image file from the TFTP server. (Figure 3) Note: The content of the image file will write the whole firmware of the management module, please be sure that the image file is correct. 1-1-4 Configuration Update
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
 |
 |
Figure (2) Configuration
1-1-1
Software Reboot
To reboot for the software setting.
1-1-2
Factory Reset
This function is to set the device back to the default setting in case of the messy setting.
1-1-3
Image Update
Figure (3)
The section is to set the TFTP Server IP Address first, and the default address was set to
“192.168.1.2”. The Image File can be updated by uploading the image file from the
TFTP server.
(Figure 3)
Note: The content of the image file will write the whole firmware of the management module, please
be sure that the image file is correct.
1-1-4
Configuration Update