TRENDnet TK-800R Manual - Page 7

setting the new password, the eight-zero default password will no longer work. If you forget the password, you need to send the unit back to your distributor for factory reset. Performing the factory reset will set all the settings in the Switch back to their default values. The Push Buttons "Port Select" button: Press this button once to move from one "Computer Port" to the next (see the illustrations below). If the Switches are daisy-chain together, only the Master KVM Switch's "Port Select" button is functional. The Master KVM Switch is the first Switch of the daisy-chain, it has Keyboard, Monitor, and Mouse connected to its "Console Port". To select different Computer Port on theSlave Switch, from theMaster Switch, push the "Bank Select" button to select the desired Slave Switch (Bank) and then push the "Port Select" button to select the Computer Port. Th e "Bank No." and "Port No." LED Display on the Master Switch will be the same as the LED Display on the selectedSlave Switch. TK-400R (4 Port) 1 2 3 4 "Port selection sequence", you can keep pushing the button to cycle through every port on the Switch. TK-800R (8 Port) TK-1600R (16 Port) "Port No." LED Indication: When the selected Computer Port is disconnected from the PC or if the PC is not powered up, the Switch's "Port No." LED will flash. When the selected Computer Port has a PC Connected to it and the PC is powered on, the selected "Port No." LED will stay solid. If the Switches are Daisy-Chain together and the bank selection is at the Mater KVM Switch (Bank 1), only the Master Switch's Port No. LED will display numbers. All other Slave Switches' "Port No." LED will show -- -- . If you push the "Bank Select" button on the Master Switch and select one of the Slave Switches , the "Port No." LED will display the Port Number of a port that has a computer online. 6