TRENDnet TK-800R Manual - Page 9

Scroll ? Scroll ? Lock Lock Next Channel (Port) Note: You can also press the "up arrow key" or "down arrow key" again within 2 seconds from the last stroke command to select the next or previous port. Scroll ? Lock Scroll ? Lock Page Up Previous Bank Scroll Lock ? Scroll ? Lock Page Down Next Bank To select PC Port in Dais y-Chain Configuration: Scroll Lock Scroll ? Lock ? Bank No. Port No. 1 ~ 8 ? 01 ~ 16 Note: Port No. = 01 ~ 04 (TK-400R) 01 ~ 08 (TK -800R) 01 ~ 16 (TK-1600R) Note: Please use the number keys above the letter keys on the keyboard to enter the bank and port numbers. Scroll Lock ? Scroll ? Lock B Beep Sound Off / On (for auto-scan mode only) Note: The default is Beep Sound On Scroll ? Scroll ? S Lock Lock Auto Scan Mode Note: In Auto Scan Mode, the Switch will automatically scan from one computer to the other. The Switch will "beep" once when changing from one computer port to the next. You can turn the beeping sound off or on by pressing "Scroll Lock" key twice and then press "B". During the scan, the Switch's LEDs will display the "Port No." that it is currently monitoring. The default scan interval time is 10 seconds. You can change the time interval in OSD menu (see On Screen Display Operation below). In daisy-chain configuration, it is possible to set different scan time interval for each Switch. When the Switch is in Auto Scan Mode, press any key to cancel the Auto Scan Mode and the Monitor will show the screen of the last scanned PC. Scroll Lock ? Scroll ? Lock R Reset to OSD default value Note: Not including password. Note: During the ROM Flash, you will see ROM REFLASH flashing on the screen and the Master Switch's "Port No." LED shows " -- -- ". The ROM Reflash process takes about 55 seconds. 8