TRENDnet TPL-308E Quick Installation Guide - Page 25

Technical Specifications, Dimension L x W x H - tpl 308e2k powerline 200

Page 25 highlights

TRENDnet User's Guide Technical Specifications Hardware Standards Interface Frequency Band IEEE 1901, HomePlug® AV, IEEE 802.3, IEEE 802.3x, IEEE 802.3u • 1 x 10/100 Mbps Auto-MDIX port • 1 x Sync / Reset button • Power prong o A: North America Type B (NEMA 5-15) o EU: Euro Type C (CEE 7/16) o UK : United Kingdom Type G (BS 1363) 2 ~ 30 MHz Modulation OFDM Symbol Modulation on link synchronization, 1024/256/64/8 - QAM, QPSK, BPSK, ROBO Carrier Protocol TDMA and CSMA/CA Speed Powerline: up to 200 Mbps** Ethernet: Up to 200 Mbps (Full Duplex mode) Utility OS Compatibility Windows 7 (32/64-bit), Vista (32/64-bit), XP (32/64bit) Nodes Up to 4 (max.) Overlapping Powerline Networks Up to 4 (per electrical system) Coverage Up to 300 m (984 ft.) Security 128-Bit AES (Advanced Encryption Standard) LED Power (PWR) Powerline (PL) Connection • Best (Green) • Better (Amber) • Good (Red) © Copyright 2012 TRENDnet. All Rights Reserved. TPL-308E / TPL-308E2K • No connection (Off) Buttons Ethernet (ETH) Connection • Solid • Blinking • Off Sync (3 sec.) / Reset (20 sec.) Dimension (L x W x H) A: 70 x 50 x 43 mm (2.76 x 1.97 x 1.69 in.) per unit EU: 70 x 50 x 63 mm (2.76 x 1.97 x 2.48 in.) per unit UK: 70 x 50 x 58 mm (2.76 x 1.97 x 2.28 in.) per unit Weight (TBD) A: 62.4 g (2.2 oz) per unit EU: 68 g (2.4 oz) per unit UK: 79.4 g (2.8 oz) per unit Power Source 100~240 V AC, 50~60 Hz Consumption Active mode: 1.75 watts (max.) Standby mode: 0.56 watts (max.) Temperature Operating: 0° ~ 40°C (32° ~ 104°F) Storage: -10° ~ 55°C (14° ~ 131°F) Humidity Max. 95% (non-condensing) Certifications CE, FCC * Maximum of 4 adapters (nodes) recommended for streaming video across your network. ** 200Mbps is the maximum theoretical Powerline data rate. Actual throughput will vary depending on environment. *** Networked Powerline devices need to be plugged into power outlets that are on the same electrical system. **** GFCI outlets and AFCI circuit breakers may degrade Powerline network signals. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-308E / TPL-308E2K
23
Technical Specifications
Hardware
Standards
IEEE 1901, HomePlug® AV, IEEE 802.3, IEEE 802.3x,
IEEE 802.3u
Interface
1 x 10/100 Mbps Auto-MDIX port
1 x Sync / Reset button
Power prong
o
A: North America Type B (NEMA 5–15)
o
EU: Euro Type C (CEE 7/16)
o
UK : United Kingdom Type G (BS 1363)
Frequency Band
2 ~ 30 MHz
Modulation
OFDM Symbol Modulation on link synchronization,
1024/256/64/8 - QAM, QPSK, BPSK, ROBO Carrier
Protocol
TDMA and
CSMA/CA
Speed
Powerline: up to 200 Mbps**
Ethernet: Up to 200 Mbps (Full Duplex mode)
Utility OS
Compatibility
Windows 7 (32/64-bit), Vista (32/64-bit), XP (32/64-
bit)
Nodes
Up to 4 (max.)
Overlapping
Powerline Networks
Up to 4 (per electrical system)
Coverage
Up to 300 m (984 ft.)
Security
128-Bit AES (Advanced Encryption Standard)
LED
Power (PWR)
Powerline (PL) Connection
Best (Green)
Better (Amber)
Good (Red)
No connection (Off)
Ethernet (ETH) Connection
Solid
Blinking
Off
Buttons
Sync (3 sec.) / Reset (20 sec.)
Dimension (L x W x H)
A: 70 x 50 x 43 mm (2.76 x 1.97 x 1.69 in.) per unit
EU: 70 x 50 x 63 mm (2.76 x 1.97 x 2.48 in.) per unit
UK: 70 x 50 x 58 mm (2.76 x 1.97 x 2.28 in.) per unit
Weight (TBD)
A: 62.4 g (2.2 oz) per unit
EU: 68 g (2.4 oz) per unit
UK: 79.4 g (2.8 oz) per unit
Power Source
100~240 V AC, 50~60 Hz
Consumption
Active mode: 1.75 watts (max.)
Standby mode: 0.56 watts (max.)
Temperature
Operating: 0° ~ 40°C (32° ~ 104°F)
Storage: -10° ~ 55°C (14° ~ 131°F)
Humidity
Max. 95% (non-condensing)
Certifications
CE, FCC
* Maximum of 4 adapters (nodes) recommended for streaming video across your network.
** 200Mbps is the maximum theoretical Powerline data rate.
Actual throughput will vary
depending on environment.
*** Networked Powerline devices need to be plugged into power outlets that are on the same
electrical system.
**** GFCI outlets and AFCI circuit breakers may degrade Powerline network signals.