TRENDnet TPL-310AP Quick Installation Guide - Page 8
WPA2AES, Passphrase, Hex 64 characters
 |
UPC - 710931506150
View all TRENDnet TPL-310AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
11. Select WPA2(AES). 12. Select Passphrase or Hex (64 characters) for Pre-Shared Key Format. 13. Enter characters for your Pre-Shared key and then click Next. For WPA-PSK or WPA2-PSK, the Pre-Shared Key must be between 8 and 63 ASCII (Passphrase) or 64 (HEX 0-9 & A-F) characters. Make sure to copy down the Pre-Shared Key. Use the same encryption key on your wireless computer or other wireless device to connect to the TPL-310AP wirelessly. 14. Please wait 25 seconds while the TPL-310AP reboots. 15. After the settings are applied and the device has rebooted, disconnect the TPL-310AP from the power outlet. 6
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
 |
 |
6
15.
After the settings are applied and the device
has rebooted, disconnect the TPL-310AP from
the power outlet.
11.
Select
WPA2(AES)
.
12.
Select
Passphrase
or
Hex (64 characters)
for Pre-Shared Key Format.
13.
Enter characters for your Pre-Shared key and
then click
Next
. For WPA-PSK or WPA2-PSK,
the Pre-Shared Key must be between 8 and
63 ASCII (Passphrase) or 64 (HEX 0-9 & A-F)
characters. Make sure to copy down the
Pre-Shared Key. Use the same encryption key
on your wireless computer or other wireless
device to connect to the TPL-310AP wirelessly.
14.
Please wait 25 seconds while the TPL-310AP
reboots.