TRENDnet TPL-421E Users Guide - Page 14
Move Powerline adapters between different, overlapping powerline networks
View all TRENDnet TPL-421E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
TRENDnet User's Guide Move Powerline adapters between different overlapping powerline networks Note: Assuming all Powerline adapters are TRENDnet Powerline adapters and for reference in the diagram and this procedure, the adapters will be labeled Adapter A, B, C, D, and E. Adapters A, B, and C are currently connect together to form one Powerline network and adapters D and E form another Powerline network. Adapter B will be disconnected from adapters A and C and connected to adapters D and E. TPL-421E/TPL-421E2K network name of adapter D and adapter E. All LEDs will turn off and turn back on and the Powerline LED will turn on the when adapters are connected. 1. Push and hold the Reset button on adapter B for 1 second and release it. All LEDs will turn off and turn back on. This will make adapter B settings to factory default. 2. Push and hold the Sync button on adapter D for 2 seconds and release it. The Power LED will start blinking. 3. Within 2 minutes, push and hold the Sync button on adapter B for 2 seconds and release it. The Power LED will start blinking. This will establish connectivity between adapter B, adapter D, and adapter E by reconfiguring the network name of adapter B to match the © Copyright 2015 TRENDnet. All Rights Reserved. 14