TRENDnet TPL-421E Users Guide - Page 7
Important
View all TRENDnet TPL-421E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
TRENDnet User's Guide Power plug (US) Plug directly into an available power outlet. Not on a power strip. Power plug (EU) with grounding wire Power plug (UK) © Copyright 2015 TRENDnet. All Rights Reserved. TPL-421E/TPL-421E2K Ground Wire TPL-421E using all 3 power wires to boost up the Powerline communication speed to gigabit. Please use 3 wire sockets and make sure your electric system installed with all load, natural and ground 3 wires. Important !! Push Buttons Button Reset Sync Sync Action Push for 1 second Push for 15 seconds until all LEDs goes off Push for 2 seconds Function Reset device settings to factory defaults (All LEDs will turn off and turn back on). It will reset to the factory default private network name "HomePlug AV". Generate a new random network name and encryption key (All LEDs will turn off and turn back on). Start a synchronization session. The POWER LED will start blink for 2 minutes. Start the synchronization session on another power adapter within the time to synchronize the network name and exchange the encryption keys. Power Save Mode: The Powerline adapter will automatically going into standby mode to reduce power usage when there is no network traffic for more than 10~20 minutes. All LEDs are going off. It can be wake up automatically when the network traffic is coming again. It takes a couple seconds to wake up and resume back to full speed of service. 7