TRENDnet TV-IP302PI User's Guide - Page 19
Continue to this website, Network >> Advanced >> SNMP
View all TRENDnet TV-IP302PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
TRENDnet User's Guide 4. According to the certificate source, there are two ways to install the certificate. - If you had sent the certificate request to do sign and received a signed certificate, please click" browse" and find the certificate file in your computer. Click "Apply" to install it. - If you choose to generate a self-signed certificate, fill in the following forms and set validity day, click "Apply" to finish installed it. TV-IP302PI After finishing installation, you can click "Content" to call out and check the certificate content. 5. To use Https to access camera, open your browser, and key in "https://(IP address)/" in the address bar. Now your data will be transmitted via encrypted communications, and the browser will check your certificate status. If it shows you a warning message. The warning message meant that the certificate is selfsigned or signed by distrusted institution. Click Continue to this website to view the view the camera. © Copyright 2013 TRENDnet. All Rights Reserved. Network >> Advanced >> SNMP SNMP (Simple Network Management Protocol) provides a simple framework for administering networked hardware. To manage the IP camera, you have to prepare a MIB browser or similar tools first. SNMPv1, SNMPv2c, and SNMPv3 can be enabled simultaneously. The following examples are based on MG- SOFT MIB Browser. Depending on your MIS Browser, you may see different interface and options. Please refer to the user manual of your MIB Browser. SNMPv1 and SNMPv2: The term "Community name" in SNMPv1 and SNMPv2c can be roughly regarded as key. The person who has the community name has the authority to read or edit the information of IP camera via SNMP. Click the box to enable SNMPv1 or SNMPv2c protocol, and specify the community name for write (read and write) and read (read-only). The user who use read community name to access the IP camera cannot modify any data of the camera. The community name can be any English characters and numbers, and must be shorter than 31 bits. 18