TRENDnet TV-IP302PI User's Guide - Page 4
TRENDnet User's Guide, TV-IP302PI - reset
View all TRENDnet TV-IP302PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
TRENDnet User's Guide Camera Connectors Application Diagram TV-IP302PI Speaker Out GPIO Port Ethernet /PoE Microphone BNC Power Port In Video Out Connector Power Connector: Connects the power adapter to supply power to the camera if using non-PoE connection BNC Video Out: Connect a CRT monitor or handheld monitor. Microphone In: Connects an external microphone to receive the on-the- spot sound where the camera is installed. Ethernet/PoE Port: Plugs the network cable to connect to your local area network (LAN). If you are using the PoE, you must have the network cable connect to your PoE switch or PoE Injector. GPIO Port: Connect external device. Please refer to I/O setting paragraph. It's also used for IP camera reset. Please refer to Factory Default paragraph. Speaker Out: Connects an external audio device (such as the active speaker) to deliver sound via the camera. © Copyright 2013 TRENDnet. All Rights Reserved. 3