TRENDnet TV-IP321PI Quick Installation Guide - Page 8

Mounting the camera Note: For tips on capturing appropriate camera viewing angle, please refer to the User's Guide. 1. Loosen the adjustable nut and remove the cover. 2. Manually position the camera as desired. 3. Place the provided template label on the mounting surface. Ceiling Mounting Hole Hole Hole 4. Drill holes for the provided screw anchors at each marked position on the template. Make sure the drill bit matches the size of the provided screw anchors. 5. You can run your cable from back of the camera, or route it through the side of the base. Skip to step 7 if you are doing so. 6. Drill a hole in the wall for the cables and then pass the camera's cables through the hole. 7. Connect the network cable to the camera. Ensure the camera is not powered. 8. Insert the provided screw anchors into the holes. 7