Thermador BICM24CS User Manual - Page 11

UNIT IS HEATING UNIT IS RINSING Display Display indicates the settings, the processes which are running and any messages issued by the appliance. The appliance has been programmed with standard settings for optimum operation. These settings can be changed ć see chapter Changing settings / programming". ON/OFF Button d The appliance is switched on or set to standby mode with button d. When button d is pressed, the appliance heats up and is then rinsed. The illuminated ring on button d flashes during this process. The appliance is not rinsed if: - the appliance was still warm when switched on or - coffee was not discharged before the appliance was switched to standby" mode. Heating and washing processes are displayed. While coffee is being brewed, button d is assigned a stop function. The process is terminated by pressing button d. i 4 hours after the last coffee was brewed, a rinsing process is automatically initiated and the appliance switches to standby" mode. These settings can be changed ć see chapter Changing settings / programming". Cafe button Espresso or coffee can be brewed by pressing the 2button. The green illuminated ring flashes whileĂespresso or coffee is being brewed. If the 2 button is pressed again, the coffee brewing process is terminated. 11