Thermador BICM24CS User Manual - Page 23

System messages ADD WATER ADD BEANS FILL UP PIPE-SYS SYSTEM TOO HOT EMPTY TRAYS PRESS CAFE TRAYS MISSING CLEAN UNIT UNIT CALCIF. FILTER CHANGE The appliance indicates processes and messages on displayĂ6. Meaning Remedial action No water. Pour fresh, cold water into the water tank. Note: There is always a small amount of water left in the water tank. Water tank is missing Insert water tank. orĂnot inserted correctly. No coffee beans. Add coffee beans to the bean container 17. Note: The ADD BEANS display is lit until coffee is brewed again. Water pipe system in the Press 2button. appliance is empty. System heated up by Steam on. Allow system to cool down by letting out some hot water 0. Tray 23 and coffee dreg tray 21 are full, or conĆ tacts 25 soiled. Remove, empty, and reĆinsert tray 23 and coffee dreg tray 21. Clean and dry contacts 25. Tray 23 and coffee dreg Insert tray 23 and coffee dreg tray 21 are missing. tray 21. Note: If coffee dreg tray 21 is missing only, the display indicates no message. The illuminated ring on the + button is lit red. Run cleaning program ć see chapter Cleaning the appliance". The illuminated ring on the 4 descaling button is lit red. Run descaling program ć see chapter Descaling the appliance". The filter 20 is no longer effective after 400 brews or approx. 2 months. Change filter 20 (order no. 46 1732) or continue operatĆ ing the appliance without filter. Change settings. 23