Thermador CET305YB Installation Instructions - Page 8

en-us Checking the installation Model CET366YB CEM305TB CEM366TB 240 V AC, 60 Hz system: circuit breaker 50 Amp 40 Amp 50 Amp 208 V AC, 60 Hz system: circuit breaker 40 Amp 30 Amp 40 Amp 5.2 Connecting electrical supply WARNING Before installing, turn power OFF at the service panel. ▶ Lock service panel to prevent power from being turned ON accidentally. To reduce the risk of electrical shock and fire, do not use a flexible power-supply cord with this appliance. Connect only to a 3-wire, 120/240-Volt power supply; the neutral conductor is not required for the operation of the appliance. The voltage at the power supply electrical connections shall be 150-volts-to-ground or less. Requirement: The electrical power supply system should be a 1-phase, 3-wire system with ground connection. 1. Install a suitable junction box (not furnished). - An appropriately-sized, UL-listed conduit connector must be used to correctly attach the conduit to the junction box. - The branch-circuit breakers ampacity, the wire sizes and the connections must conform to the requirements of the National Electrical Code or Canadian Electrical Code and all local codes and ordinances. 2. Attach the flexible conduit to the junction box. Metal conduit and leads are factory installed. 3. Connect the cooktop lead wires to the junction box supply wires in proper phase. - black (L1) to black - red (L2) to red - green or blank copper wire to ground Detailed information on the warranty period and terms of warranty can be found in the Statement of Limited Product Warranty, from your retailer, or on our website. If you contact the Customer Service, you will need the model number (E-Nr.) and the production number (FD) of your appliance. USA: 1-800-735-4328 www.thermador.com/support www.store.thermador.com/us CA: 1-800-735-4328 www.thermador.ca 7.1 Model number (E-Nr.) and production number (FD) You can find the model number (E-Nr.) and the production number (FD) on the appliance's rating plate. Making a note of your appliance's details and the Customer Service telephone number will enable you to find them again quickly. 7.2 Rating plate location You can find the rating plate of your appliance: ¡ on the underside of the appliance ¡ in the appliance pass Checking the installation 6 Checking the installation Checking the installation Check if your unit is working properly after you have completed the installation steps. WARNING Before you turn on power supply, make sure all controls are in the OFF position. 1. Remove everything from the cooktop surface including stickers. 2. Clean the cooktop surface with cooktop cleaning cream. 3. Switch on the circuit breaker. 4. Verify that all cooking zones function properly. Customer Service 7 Customer Service Customer Service If you have any questions on use, are unable to eliminate an issue in the appliance yourself, or the appliance needs to be repaired, please contact our Customer Service. With any warranty repair, we will make sure your appliance is repaired by an authorized service provider using genuine replacement parts. We use only genuine replacement parts for all repairs. Rating plate 8