Thermador CIT304YM Instructions for Use - Page 13
Panel lock, Wipe protection, Basic settings
View all Thermador CIT304YM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
1. Press on the printed words for the cooking zone you want to select. 2. Press POWER BOOST. a goes out. a The cooking zone switches to power level . Notes ¡ In certain circumstances, this function may switch off automatically in order to protect the electronic elements inside the cooktop. ¡ If you have set a power level before activating the function, this power level is used automatically after the function has been deactivated. 6.7 Panel lock You can use the panel lock to prevent the cooktop from being turned on accidentally. CAUTION The panel lock may be turned on and off accidentally due to: ▶ water spilled during cleaning ▶ food that has overflowed ▶ objects being placed on the panel lock touch key. Activating the panel lock Requirement: The cooktop is turned off. ▶ Touch LOCK for 4 seconds. a The indicator over LOCK lights up for 10 seconds. a The control panel is locked. Deactivating the panel lock You can turn off the wipe protection manually. ▶ Touch LOCK for 4 seconds. a The control panel is unlocked. Automatic panel lock This function automatically activates the panel lock when you switch off the cooktop. The automatic panel lock can be activated in the basic settings → Page 13. 6.8 Wipe protection With this function you can avoid changing the settings while cleaning the control panel during cooking. This function does not lock the main switch. You can turn the cooktop off at any time. Activating wipe protection ▶ Touch LOCK. a The indicator above LOCK lights up. a The control panel is locked for 35 seconds. a After 30 seconds a beep indicates that the wipe protec- tion is about to turn off. Deactivating wipe protection ▶ Touch LOCK. a The indicator above LOCK goes out. Operation en-us 6.9 Basic settings You can configure your appliance to meet your needs. Basic settings overview Here you can find an overview of the basic settings and the preset factory settings. Display Function Panel lock - Manual1 - Automatic - Function deactivated Signal tones - Confirmation signal and error signal are off. The main switch signal remains on. - Only error signal is on. - Only confirmation signal is on. - Confirmation signal and error signal are on.1 Duration of timer end signal - 10 seconds1 - 30 seconds - 1 minute Power management function. Limiting the to- tal power of the cooktop. The available set- tings depend on the maximum power of the cooktop. - Deactivated1, 2 - 1.000 W minimum power - 1.500 W ... - 3.000 W recommended for 13 A . - 3.500 W recommended for 16 A - 4.000 W . - 4.500 W recommended for 20 A ... or . - Maximum power of the cooktop2 Time for setting a cooking zone after selection - Unlimited: The last selected cooking zone remains selected. You can adjust the settings without having to select it again. - Limited: You can adjust the settings for the selected cooking zone within 10 seconds. After 10 seconds you have to select the cooking zone again. Results for suitability test for cookware - Not suitable. - Not ideal. -Suitable. Restore factory settings - Off1 - Restore appliance to factory settings 1 Factory setting (may vary according to model) 2 The cooktop's maximum power output is shown on the rating plate Changing the basic settings Requirement: The cooktop is turned off. 1. Turn on the cooktop. 2. Within the next 10 seconds, press TIMER for about 4 seconds. 13