Thermador DWHD651JPR Design Guide - Dishwashers - Page 10

DISHWASHERS Installation options CUSTOM DOOR PANELS (DWHD640JPR) Fully integrated models allow you to have a custom door panel made to match your cabinetry. The custom door can be a two-piece configuration to look like a drawer at the top and a cabinet door at the bottom or like a single full-length door. A template is included with the fully integrated models to explain the mounting procedure. NOTE: The door springs that are included with the fully integrated units will provide proper function for custom door panels weighing between 9 and 15 pounds. Custom door panels weighing up to 18 pounds require the use of the tension adjustment screws. DISHWASHERS TOPAZ™ 6-PROGRAM DWHD640JFP / DWHD640JFM / DWHD640JPR DISHWASHER & CUTOUT DIMENSIONS DWHD640JFP / DWHD640JFM WATER AND ELECTRICAL LOCATIONS For proper dishwasher operation and appearance, ensure that the enclosure is square and has the dimensions shown. Plumbing and electrical service must enter shaded area. Make required openings to allow for passage of the water, drain and electrical line. in order to avoid interference with the dishwasher when sliding it into the cabinet, place your openings within the dimensions shown. NOTE: if the incoming electric supply, water supply and drain connections are all in the same cabinet, the one 4 1/2" x 2 1/2" hole will be large enough for all three to pass through. The dishwasher electrical supply junction box and dedicated receptacle must be mounted in an accessible cabinet adjacent to the dishwasher (do not mount the junction box or receptacle behind the dishwasher). You will need a 4 1/4" x 2" (108 x 51 mm) opening through the cabinet in order to pass the junction box through. The electrical supply can be connected in one of two ways: - Use the included 3-wire plug and junction box to connect to a dedicated household receptacle. - Permanently connect to household or field wiring DWHD640JPR Water and electrical location Dimensions TOPAZ Series Required Openings: 4 1/4" x 2" (108 x 52 mm) - To pass the included electrical supply junction box through to an adjacent cabinet 4" x 2" (100 x 50 mm) - To pass the included water supply line toward the water supply 1 1/4" (32 mm) diameter - To pass the dishwasher drain hose toward the drain connection Electrical and Water Connection 1.800.735.4328 | THERMADOR.COM 297