Thermador DWHD651JPR Design Guide - Dishwashers - Page 6

Electrical Specifications, Water And Electrical Locations, Model Options, Installation - manual

Page 6 highlights

DISHWASHERS MODEL OPTIONS There are four Thermador Dishwasher Series to choose from in the Collection - Emerald® (4-program),Topaz™ (6-program), Sapphire® (6-program) and Star-Sapphire™ (6-program). All series models are available with a Masterpiece® or Professional Handle to perfectly match other Thermador appliances in your kitchen. All series have a custom panel option to fully integrate with your cabinetry. Be sure to reference the correct model information in this design guide. INSTALLATION CONSIDERATIONS The information in this design guide provides key features, product dimensions, cutouts and installation specifications. Before installing a Thermador Dishwasher, be sure to verify the cabinet dimensions, electrical connections and water connections. Also, always consult with the installation manual packed with the product for complete details before installing. Thermador Dishwashers are designed to be enclosed on the top and both sides by standard residential kitchen cabinetry. For Emerald the opening should be at least 34" high and 24" wide (or 23 5/8" wide with decor strips removed). For Topaz, Sapphire and Star-Sapphire the opening should be at least 34 1/16" high and 24" wide. (or 23 5/8" wide with decor strips removed). If the dishwasher is to be installed in a corner, make sure that there is adequate clearance to open the door. Select a location as close to the sink as possible for easy access to water supply and drain lines. Note: Plumbing installations will vary - refer to local codes. The maximum length of the drain hose, including hose leading to air gap (if any) is 150" (381 cm). Ensure a portion of the drain hose is raised at least 20" (51 cm) above the floor to ensure proper draining. WARRANTY Full warranty, entire appliance, parts and labor (2 year) See page 308 for additional warranty details. DISHWASHERS PLANNING INFORMATION ELECTRICAL SPECIFICATIONS This appliance must be grounded to a metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the dishwasher. MODEL Emerald® DWHD410JFP DWHD410JFM DWHD410JPR TOPAZ™ DWHD640JFP DWHD640JFM DWHD640JPR Sapphire® DWHD650JFP DWHD650JFM DWHD650JPR Star-Sapphire™ DWHD651JFP DWHD651JFM DWHD651JPR REQUIRED CIRCUIT Breaker 120V, 60 Hz, 12 Amp 120V, 60 Hz, 12 Amp 120V, 60 Hz, 12 Amp 120V, 60 Hz, 12 Amp 120V, 60 Hz, 12 Amp 120V, 60 Hz, 12 Amp 120V, 60 Hz, 12 Amp 120V, 60 Hz, 12 Amp 120V, 60 Hz, 12 Amp 120V, 60 Hz, 12 Amp 120V, 60 Hz, 12 Amp 120V, 60 Hz, 12 Amp WATER AND ELECTRICAL LOCATIONS Refer to individual model pages for details on water hook-up and electrical locations. All Thermador Dishwashers are ENERGY STAR® Qualified Dishwashers are UL and CUL approved. 1.800.735.4328 | THERMADOR.COM 293

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

DISHWASHERS
1.800.735.4328
|
THERMADOR.COM
293
DISHWASHERS
PLANNING INFORMATION
ELECTRICAL SPECIFICATIONS
This appliance must be grounded to a metal, permanent wiring system, or an
equipment grounding conductor must be run with the circuit conductors and
connected to the equipment grounding terminal or lead on the dishwasher.
Dishwashers are UL and CUL approved.
WATER AND ELECTRICAL LOCATIONS
Refer to individual model pages for details on water hook-up and
electrical locations.
All Thermador Dishwashers are ENERGY STAR
®
Qualified
MODEL OPTIONS
There are four Thermador Dishwasher Series to choose
from in the Collection — Emerald
®
(4-program),Topaz
(6-program), Sapphire
®
(6-program) and Star-Sapphire
(6-program). All series models are available with a
Masterpiece
®
or Professional Handle to perfectly match
other Thermador appliances in your kitchen. All series
have a custom panel option to fully integrate with
your cabinetry. Be sure to reference the correct model
information in this design guide.
INSTALLATION CONSIDERATIONS
The information in this design guide provides key
features, product dimensions, cutouts and installation
specifications. Before installing a Thermador
Dishwasher, be sure to verify the cabinet dimensions,
electrical connections and water connections. Also,
always consult with the installation manual packed with
the product for complete details before installing.
Thermador Dishwashers are designed to be enclosed
on the top and both sides by standard residential
kitchen cabinetry.
For Emerald the opening should be at least 34"
high and 24" wide (or 23
5
/
8
" wide with decor strips
removed).
For Topaz, Sapphire and Star-Sapphire the opening
should be at least 34
1
/
16
" high and 24" wide. (or 23
5
/
8
"
wide with decor strips removed).
If the dishwasher is to be installed in a corner, make sure
that there is adequate clearance to open the door.
Select a location as close to the sink as possible for
easy access to water supply and drain lines.
NOTE:
Plumbing installations will vary — refer to local
codes. The maximum length of the drain hose, including
hose leading to air gap (if any) is 150" (381 cm). Ensure
a portion of the drain hose is raised at least 20" (51 cm)
above the floor to ensure proper draining.
WARRANTY
Full warranty, entire appliance, parts
and labor (2 year)
See page 308 for additional warranty details.
MODEL
REQUIRED CIRCUIT BREAKER
EMERALD
®
DWHD410JFP
120V, 60 Hz, 12 Amp
DWHD410JFM
120V, 60 Hz, 12 Amp
DWHD410JPR
120V, 60 Hz, 12 Amp
TOPAZ
DWHD640JFP
120V, 60 Hz, 12 Amp
DWHD640JFM
120V, 60 Hz, 12 Amp
DWHD640JPR
120V, 60 Hz, 12 Amp
SAPPHIRE
®
DWHD650JFP
120V, 60 Hz, 12 Amp
DWHD650JFM
120V, 60 Hz, 12 Amp
DWHD650JPR
120V, 60 Hz, 12 Amp
STAR-SAPPHIRE
DWHD651JFP
120V, 60 Hz, 12 Amp
DWHD651JFM
120V, 60 Hz, 12 Amp
DWHD651JPR
120V, 60 Hz, 12 Amp