Thermador PH54GS Design Guide - Ventilation - Page 36
Installation Options, Blower Pressure Curves
View all Thermador PH54GS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
VENTILATION - CHIMNEY WALL HOODS VENTILATION CHIMNEY WALL DRAWER HOOD (36") HDDW36FS INSTALLATION OPTIONS Thermador Chimney Wall Hoods may be installed above a Thermador non-professional gas, electric, or induction cooktop to create a convenient cooking center. Refer to the appropriate section for additional specifications. Hood installation height above a cooktop can vary. To obtain the necessary installation height above a Thermador nonprofessional gas, electric, or induction cooktop, consult the appliance's installation manual. Thermador Chimney Wall Hoods must be mounted on a wall. These hoods are designed to be used for vertical discharge. A 600 CFM integrated blower is included. BLOWER PRESSURE CURVES HDDW36FS Installation Note: This product ships with two transport brackets to hold the moveable canopy in place during shipping and installation. After installation, be sure to remove the brackets to operate the sliding drawer canopy. NOTE: All measurements are made with 3 ft. straight duct, 90° bend and 1 ft. straight duct at exhaust. These are NOT free blowing measurements. 1.800.735.4328 | THERMADOR.COM 163